Dr. Kaushal Kumar

Associate Professor, Mechanical Engineering
ghanghaskaushal@gmail.com, 122103, Gurugram, IN.

About

Highly accomplished Associate Professor and Mechanical Engineer with over 15 years of experience in research, teaching, and academic leadership. Recognized among the world's top 2% scientists (Stanford & Elsevier 2025) and awarded Best Researcher (2022) by K.R. Mangalam University. Specializes in sustainable materials, advanced manufacturing, and AI/ML applications, driving impactful research, supervising doctoral candidates, and fostering innovation to significantly contribute to organizational growth and technological advancement.

Work

K.R.Mangalam University
|

Associate Professor, Department of Mechanical Engineering

Gurugram, Haryana, India

→

Summary

Led mechanical engineering research and education, driving innovation in sustainable materials, advanced manufacturing, and AI/ML applications while mentoring doctoral candidates.

Highlights

Recognized among the world's top 2% scientists by Stanford and Elsevier (2025), reflecting significant impact and influence in the field of Mechanical Engineering.

Awarded the 'Best Researcher Award' for 2022 by K.R. Mangalam University, acknowledging outstanding contributions to research and academic excellence.

Supervised 6 Ph.D. candidates to successful completion, guiding advanced research in areas like Lean Construction, Asymmetric Cryptosystems, and Intrusion Detection Systems.

Authored and co-authored over 100 SCI/Scopus indexed publications, 10 book chapters, and 10 books, significantly advancing knowledge in tribology, sustainable materials, and advanced manufacturing.

Secured 8 international patents in areas such as hybrid concrete, solar thermal collectors, and intelligent assistance systems, demonstrating innovative research and practical application.

Chaired multiple sessions at international scientific conferences (e.g., Sustainable Energy Systems: Innovative Perspectives, SES-2020), facilitating knowledge exchange among global experts.

K.R. Mangalam University
|

Associate Professor

Gurugram, Haryana, India

→

Full Time

Guru Jambheshwar University of Science and Technology
|

Assistant Professor & Research Scholar, Mechanical Engineering

Hisar, Haryana, India

→

Summary

Conducted extensive research as a Ph.D. scholar and contributed to teaching mechanical engineering courses, fostering academic growth and scientific inquiry.

Highlights

Completed Ph.D. in Mechanical Engineering (awarded 2017), specializing in advanced material behaviors and sustainable applications.

Contributed to teaching mechanical engineering as an Assistant Professor/Teaching Associate for over two years, supporting undergraduate and postgraduate students.

Published early-career research papers in peer-reviewed journals, establishing a foundation in scientific publication and academic contribution.

Engaged in research activities focusing on tribological behavior of coated materials and rheological properties of industrial waste slurries, contributing to sustainable engineering practices.

Participated in multiple Faculty Development Programs (FDPs) and workshops on topics including advanced materials, CFD, and technical manuscript preparation, enhancing pedagogical and research skills.

I.T.S. Bhiwani
|

Assistant Professor, Mechanical Engineering

Bhiwani, Haryana, India

→

Summary

Provided foundational instruction in Mechanical Engineering for over two years, preparing students for advanced studies and professional careers.

Highlights

Delivered comprehensive lectures and practical sessions in core Mechanical Engineering subjects to undergraduate students.

Mentored students on academic projects and assignments, fostering problem-solving skills and technical understanding.

Contributed to departmental activities and curriculum development, enhancing the overall academic environment.

Maintained a strong focus on student success, integrating modern techniques and concepts into teaching methodologies.

Education

Guru Jambheshwar University of Science and Technology
Hisar, Haryana, India

→

Ph.D.

Mechanical Engineering

Guru Jambheshwar University of Science and Technology
Hisar, Haryana, India

→

M.Tech.

Mechanical Engineering

M.D.University
Rohtak, Haryana, India

→

B.Tech.

Mechanical Engineering

Awards

Listed among World's 2% Scientists

Awarded By

Stanford and Elsevier

Recognized for significant scientific contributions and impact, placing within the top 2% of scientists globally.

Best Researcher Award

Awarded By

K.R. Mangalam University

Awarded for outstanding research achievements and contributions to the academic community in 2022.

Best Research Paper Award (ICRAI 2021)

Awarded By

Cape Peninsula University of Technology

Honored for an impactful research paper presented at the ICRAI conference in South Africa.

Best Research Paper Award (AASET 2021)

Awarded By

SOET and SBAS of K.R. Mangalam University

Received for an exceptional research paper presented at the AASET 2021 conference.

Best Research Paper Award (ICFTMM 2021)

Awarded By

Delhi Technical Campus (DTC) affiliated by GGSIP

Recognized for a high-quality research paper presented at the ICFTMM 2021 conference.

Publications

Impact of Quality Change Management on Project Performance in Civil Engineering Projects in India

Published by

WSEAS Transactions on Environment and Development

Summary

Analyzed the impact of quality change management on project performance in civil engineering projects in India.

Sustainable advances in activated carbon for environmental and industrial applications

Summary

Reviewed sustainable advances in activated carbon technology for various environmental and industrial applications.

Analysis of the Performance Characteristics of Mild Steel Based Hydrodynamic Journal Bearings [15W30] Under Varying Conditions

Published by

WSEAS transactions on Fluid Mechanics

Summary

Analyzed the performance characteristics of mild steel-based hydrodynamic journal bearings under varying conditions.

Automated Brain Tumor Detection Using Convolutional Neural Network

Published by

Biotechnology and Applied Biochemistry

Summary

Developed an automated brain tumor detection system using Convolutional Neural Networks (CNN).

Air jet erosion performance and predictive modeling of cold sprayed WC-Co coatings on CA6NM steel

Published by

Int J Adv Manuf Technol

Summary

Investigated air jet erosion performance and developed predictive models for cold-sprayed WC-Co coatings on CA6NM steel.

Graphene-Based Catalysis in Wastewater Treatment: Electrocatalytic and Photocatalytic Innovations for Sustainable Development

Published by

J Inorg Organomet Polym

Summary

Investigated graphene-based catalysis, including electrocatalytic and photocatalytic innovations, for sustainable wastewater treatment.

Graphene for next-generation technologies: Advances in properties, applications, and industrial integration

Published by

Results in Engineering

Summary

Reviewed advances in graphene properties, applications, and industrial integration for next-generation technologies.

Advances in Form Finding and Structural Analysis of Anisotropic Hyperbolic Paraboloid Shaped Tensile Membrane Structures using Nonlinear Finite Elements

Published by

Proof

Summary

Advanced form finding and structural analysis of anisotropic hyperbolic paraboloid shaped tensile membrane structures using nonlinear finite elements.

Optimization of Process Parameters on Mild Steel Rotavator Blades

Published by

WSEAS Transaction on systems

Summary

Optimized process parameters for mild steel rotavator blades to improve performance and durability.

Human-centered manufacturing: Ergonomics and seating comfort in the workplace

Published by

AIP Conference Proceedings

Summary

Explored human-centered manufacturing by analyzing ergonomics and seating comfort in the workplace.

Manufacturing process simulation using mathematical models and optimization theory

Published by

AIP Conference Proceedings

Summary

Simulated manufacturing processes using mathematical models and optimization theory to enhance efficiency.

Potential Utilization of Grounded Bottom Ash for Sustainable Stowing Applications

Published by

WSEAS Transactions on Environment and Development

Summary

Investigated the potential utilization of grounded bottom ash for sustainable stowing applications.

Efficient Eco-Design Integrating Green Materials in Concrete for Sustainability

Published by

WSEAS Transactions on Environment and Development

Summary

Developed an efficient eco-design framework integrating green materials into concrete for enhanced sustainability.

Analyse the performance characteristics of mild steel plates at varying weld parameters by using artificial intelligence approaches

Published by

Welding International

Summary

Analyzed the performance characteristics of mild steel plates under varying weld parameters using artificial intelligence approaches.

Optimization of Bottom Ash Water Slurry Flow Characteristics by using Commercial Additive

Published by

WSEAS Transactions on Environment and Development

Summary

Optimized bottom ash water slurry flow characteristics using commercial additives to improve environmental and developmental outcomes.

Analysis of the performance characteristics of mild steel-based hydrodynamic journal bearings under varying conditions

Published by

Industrial Lubrication and Tribology

Summary

Analyzed the performance characteristics of mild steel-based hydrodynamic journal bearings under various operating conditions.

Enhancing abrasive wear resistance of IS-2062 steel in hydroturbine applications with WC-12 Co and WC-10 Co-4 Cr HVOF coatings

Published by

Sci Rep

Summary

Enhanced the abrasive wear resistance of IS-2062 steel in hydroturbine applications using WC-12 Co and WC-10 Co-4 Cr HVOF coatings.

Artificial neural network modeling and experimental analysis of erosion resistance in tungsten carbide-coated CA6NM stainless steel

Published by

Int J Adv Manuf Technol

Summary

Modeled and experimentally analyzed the erosion resistance of tungsten carbide-coated CA6NM stainless steel using artificial neural networks.

Comprehensive analysis of structural, optical, morphological, and magnetic properties of Mn, Fe-Doped BaTiO3 nanoparticles

Published by

J Electroceram

Summary

Conducted a comprehensive analysis of the structural, optical, morphological, and magnetic properties of Mn, Fe-Doped BaTiO3 nanoparticles.

Influence of machine learning approaches for partial replacement of cement content through waste in construction sector

Published by

Asian Journal of Civil Engineering

Summary

Explored the influence of machine learning approaches on the partial replacement of cement content with waste in the construction sector.

Machine learning-based prediction of concrete strength properties with coconut shell as partial aggregate replacement: A sustainable approach in construction engineering

Published by

Asian Journal of Civil Engineering

Summary

Developed a machine learning-based model to predict concrete strength properties using coconut shell as a partial aggregate replacement.

Novel Nanocomposite Electrolytes for Sustainable Fuel Cells

Published by

E3S Web of Conferences

Summary

Developed novel nanocomposite electrolytes for sustainable fuel cell applications.

AI-Powered Super-Workers: An Experiment in Workforce Productivity and Satisfaction

Published by

BIO Web of Conferences

Summary

Conducted an experiment on the impact of AI-powered 'super-workers' on workforce productivity and satisfaction.

Security and Privacy in AI-Driven Industry 5.0: Experimental Insights and Threat Analysis

Published by

BIO Web of Conferences

Summary

Provided experimental insights and threat analysis concerning security and privacy in AI-driven Industry 5.0.

Effective Emergency Communication through Public Displays: A Realtime Evaluation with the Emergency Communication Display Test

Published by

BIO Web of Conferences

Summary

Evaluated the effectiveness of emergency communication via public displays in real-time scenarios.

Impact of Online Communities on Civic Engagement: An Inclusivity Assessment Using the Civic Engagement Test

Published by

BIO Web of Conferences

Summary

Assessed the impact of online communities on civic engagement through an inclusivity assessment using the Civic Engagement Test.

IoT in Home Automation: A Data-Driven User Behaviour Analysis and User Adoption Test

Published by

BIO Web of Conferences

Summary

Conducted a data-driven analysis of user behavior and adoption of IoT in home automation systems.

A case study evolving quality management in Indian civil engineering projects using AI techniques: a framework for automation and enhancement

Published by

Asian Journal of Civil Engineering

Summary

Presented a case study on evolving quality management in Indian civil engineering projects using AI techniques for automation and enhancement.

Study of Discharge Outlines of Subthalamic Nucleus-Globus Pallidus External and the Favorable Impact of Deep Brain Stimulation in the Parkinson State

Published by

Journal of Pharmaceutical Research International

Summary

Studied the discharge outlines of subthalamic nucleus-globus pallidus external and the impact of deep brain stimulation in Parkinson's disease.

Modelling the Impact of Road Dust on Air Pollution: A Sustainable System Dynamics Approach

Published by

E3S Web of Conferences

Summary

Modeled the impact of road dust on air pollution using a sustainable system dynamics approach.

Parametric Influence Of Intrusion Detection System In Healthcare Sector Using Deep Neural [LSTM] Network

Summary

Investigated the parametric influence of intrusion detection systems in healthcare using deep neural networks (LSTM).

Optimization of die design parameters in ECAP for sustainable manufacturing using response surface methodology

Published by

International Journal on Interactive Design and Manufacturing

Summary

Optimized die design parameters in ECAP for sustainable manufacturing using response surface methodology.

Optimization of cycle time assembly line for mass manufacturing

Published by

International Journal on Interactive Design and Manufacturing

Summary

Optimized cycle time in assembly lines for mass manufacturing processes, enhancing production efficiency.

Computational parametric investigation of solar air heater with dimple roughness in S-shaped pattern

Published by

International Journal on Interactive Design and Manufacturing

Summary

Conducted a computational parametric investigation of solar air heaters with dimple roughness in an S-shaped pattern.

Comparative analysis of the influence of partial replacement of cement with supplementing cementitious materials in sustainable concrete using machine learning approach

Published by

Asian Journal of Civil Engineering

Summary

Analyzed the influence of partial cement replacement with supplementary cementitious materials in sustainable concrete using machine learning.

Ceramic matrix composite reinforced with glass and walnut shell filler: Influence of mesh size on its mechanical properties

Published by

Materials Today: Proceedings

Summary

Investigated the influence of mesh size on the mechanical properties of ceramic matrix composites reinforced with glass and walnut shell filler.

Design and Analysis of Intrusion Detection System Based on Ensemble Deep Neural Network and XAI

Published by

International Review on Modelling and Simulations

Summary

Designed and analyzed an intrusion detection system based on ensemble deep neural networks and explainable artificial intelligence (XAI).

IoT and Data Mining Techniques to Detect and Regulating of Solar Power System

Published by

6th ICICT 2023 - Proceedings

Summary

Applied IoT and data mining techniques for detecting and regulating solar power systems.

Eco-Friendly Building Material Innovation: Geopolymer Bricks from Repurposed Plastic Waste

Published by

E3S Web of Conferences

Summary

Innovated eco-friendly building materials by developing geopolymer bricks from repurposed plastic waste.

Circular Economy Enabler: Enhancing High-Performance Bricks through Geo polymerization of Plastic Waste

Published by

E3S Web of Conferences

Summary

Enhanced high-performance bricks through geo-polymerization of plastic waste, contributing to the circular economy.

Thermo-hydraulic investigation of two stepped micro pin fin heat sink having variable step size

Published by

E3S Web of Conferences

Summary

Conducted a thermo-hydraulic investigation of micro pin fin heat sinks with variable step sizes.

Design of Language Translator Headphone: The Future of Sustainable Communication

Published by

E3S Web of Conferences

Summary

Designed a language translator headphone, exploring its role in sustainable communication.

Influence of Additive for Optimize and Sustainable Fly Ash Suspension

Published by

E3S Web of Conferences

Summary

Optimized sustainable fly ash suspension by investigating the influence of additives.

Green and Sustainable Manufacturing with Implications of ESG In Energy Sector: A Comprehensive Review

Published by

E3S Web of Conferences

Summary

Provided a comprehensive review of green and sustainable manufacturing, highlighting ESG implications in the energy sector.

Revolutionising Heat Treatment: Novel Strategies for Augmented Performance and Sustainability

Published by

E3S Web of Conferences

Summary

Developed novel strategies for heat treatment to augment performance and sustainability in materials.

Breaking Barriers: Innovative Fabrication Processes for Nanostructured Materials and Nano Devices

Published by

E3S Web of Conferences

Summary

Explored innovative fabrication processes for nanostructured materials and nano devices, breaking technological barriers.

Breast Cancer Diagnosis from Histopathology Images Using Deep Learning Methods: A Survey

Published by

E3S Web of Conferences

Summary

Conducted a survey on breast cancer diagnosis from histopathology images using deep learning methods.

Exploring the Uncharted Territory: Future Generation Materials for Sustainable Energy Storage

Published by

E3S Web of Conferences

Summary

Explored future generation materials for sustainable energy storage applications.

Parametric investigation of coconut shells as partial replacement of coarse aggregates in sustainable concrete

Published by

E3S Web of Conferences

Summary

Investigated the parametric effects of using coconut shells as partial replacement for coarse aggregates in sustainable concrete.

Optimization of Sustainable Process Parameters of Friction-Stir Welding of Aluminium Alloy by Taguchi Method

Published by

E3S Web of Conferences

Summary

Optimized sustainable process parameters for friction-stir welding of aluminum alloy using the Taguchi method.

Understanding Composites and Intermetallic: Microstructure, Properties, and Applications

Published by

E3S Web of Conferences

Summary

Provided a comprehensive understanding of composites and intermetallics, focusing on their microstructure, properties, and applications.

Optimizations of Process Parameter for Erosion Wear Using Sustainable Machine Learning Approach

Published by

E3S Web of Conferences

Summary

Optimized process parameters for erosion wear using a sustainable machine learning approach.

Influence of Utilization of Fly Ash as Sand Replacement Agent in Sustainable Flexible Pavement

Published by

E3S Web of Conferences

Summary

Investigated the influence of utilizing fly ash as a sand replacement agent in sustainable flexible pavement construction.

Geopolymerization of Plastic Waste for Sustainable Construction: Unveiling Novel Opportunities in Building Materials

Published by

E3S Web of Conferences

Summary

Unveiled novel opportunities in building materials through the geopolymerization of plastic waste for sustainable construction.

Sustainable Infrastructure Solutions: Advancing Geopolymer Bricks via Eco-Polymerization of Plastic Waste

Published by

E3S Web of Conferences

Summary

Advanced sustainable infrastructure solutions by developing geopolymer bricks through eco-polymerization of plastic waste.

Computational parametric investigation of solar air heater with dimple roughness in S-shaped pattern

Published by

International Journal on Interactive Design and Manufacturing

Summary

Conducted a computational parametric investigation of solar air heaters with dimple roughness in an S-shaped pattern.

From Homogeneity to Heterogeneity: Designing Functionally Graded Materials for Advanced Engineering Applications

Published by

E3S Web of Conferences

Summary

Designed functionally graded materials for advanced engineering applications, transitioning from homogeneous to heterogeneous structures.

A comprehensive review on materialistic and sustainable approach for drone sanitizations

Published by

E3S Web of Conferences

Summary

Provided a comprehensive review of materialistic and sustainable approaches for drone sanitization applications.

Waste Upcycling in Construction: Geopolymer Bricks at the Vanguard of Polymer Waste Renaissance

Published by

E3S Web of Conferences

Summary

Explored waste upcycling in construction by developing geopolymer bricks from polymer waste, leading a renaissance in sustainable building materials.

Performance optimization for Intrusion Detection by Long Short Term Memory (LSTM)

Published by

E3S Web of Conferences

Summary

Optimized performance for intrusion detection systems using Long Short Term Memory (LSTM) networks.

Enhancing Cyber-Physical System Security with CGAN in Fog Environment

Published by

ICDSNS 2023

Summary

Enhanced cyber-physical system security in fog environments using Conditional Generative Adversarial Networks (CGAN).

Performance Boosting of Automatic Sun Following Panels Using Soft Computing Technique

Published by

IC3I 2023

Summary

Boosted the performance of automatic sun-following panels using soft computing techniques.

Performance Characteristics of Intrusion Detection System Based on Deep Learning in Healthcare Environment

Published by

Neuro Quantology

Summary

Analyzed performance characteristics of intrusion detection systems using deep learning in healthcare environments.

Prediction of head loss for fly ash-water slurry flow through 90° bend pipe using Computational fluid dynamics

Published by

Materials today proceedings

Summary

Predicted head loss in fly ash-water slurry flow through 90° bend pipes using Computational Fluid Dynamics (CFD).

Effect of Additive on Flowability and Compressibility of Fly Ash

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Investigated the effect of additives on the flowability and compressibility of fly ash for construction applications.

A Detailed Investigation of Structural and Optical Properties of CTAB-Assisted Cr2O3 Nanoparticles

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Conducted a detailed investigation of the structural and optical properties of CTAB-assisted Cr2O3 nanoparticles.

Phase Transformation Analysis of Fe-Substituted Cr2O3 Nanoparticles Using Rietveld Refinement

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Analyzed phase transformation of Fe-substituted Cr2O3 nanoparticles using Rietveld refinement.

Review on the Mechanical Properties and Performance of Permeable Concrete

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Reviewed the mechanical properties and performance characteristics of permeable concrete.

Role Of Deep Brain Stimulation In Globus Pallidus Neuron

Published by

Neuro Quantology

Summary

Investigated the role of deep brain stimulation in globus pallidus neurons.

Study of Discharge Outlines of Subthalamic Nucleus-Globus Pallidus External and the Favorable Impact of Deep Brain Stimulation in the Parkinson State

Published by

Journal of Pharmaceutical Research International

Summary

Studied the discharge outlines of subthalamic nucleus-globus pallidus external and the impact of deep brain stimulation in Parkinson's disease.

Neural Network Prediction of Slurry Erosion Wear of Ni-WC Coated Stainless Steel 420

Published by

Metals

Summary

Utilized neural networks to predict slurry erosion wear of Ni-WC coated Stainless Steel 420.

Machine Learning for Prediction of Heat Pipe Effectiveness

Summary

Applied machine learning techniques to predict the effectiveness of heat pipes, optimizing thermal management systems.

Application of coolants during tool-based machining – A review

Summary

Reviewed the application of various coolants in tool-based machining processes to enhance performance.

Comparative Analysis of Waste Materials for Their Potential Utilization in Green Concrete Applications

Published by

Materials

Summary

Conducted a comparative analysis of different waste materials for their potential use in green concrete applications.

Unfolding the network dataset to understand the contribution of features for detecting malicious activities using AI/ML

Published by

Materials today proceedings

Summary

Utilized AI/ML to analyze network datasets and identify features contributing to malicious activity detection.

Improving Mapreduce Heterogeneous Performance Using KNN Fair Share Scheduling

Published by

Robotics and Autonomous Systems

Summary

Enhanced MapReduce heterogeneous performance through KNN fair share scheduling in robotics and autonomous systems.

Stackelberg game approach for resource allocation in device-to-device communication with heterogeneous networks

Published by

Robotics and Autonomous Systems

Summary

Developed a Stackelberg game approach for optimizing resource allocation in device-to-device communication within heterogeneous networks.

Nimurical simulation of sand water slurry flow through pipe band using CFD

Published by

International Journal on Interactive Design and Manufacturing

Summary

Performed numerical simulation of sand-water slurry flow through pipe bends using Computational Fluid Dynamics (CFD).

Comparision of theoretical and experimental physic mechanical properties of coal fly ash (CFA) reinforced iron matrix composites

Published by

International Journal on Interactive Design and Manufacturing

Summary

Compared theoretical and experimental physical and mechanical properties of coal fly ash-reinforced iron matrix composites.

A brief review on segregation of solid wastes in Indian region

Published by

Materials Today: Proceedings

Summary

Provided a brief review of solid waste segregation practices and challenges in the Indian region.

Pressure drop measurement for fine particulate slurry using optimization process

Published by

Materials Today: Proceedings

Summary

Measured pressure drop in fine particulate slurry using an optimized process, enhancing efficiency in industrial applications.

Experimental investigation on fly ash as sand replacement in flexible pavement: A case study

Published by

Materials Today: Proceedings

Summary

Conducted an experimental investigation on the use of fly ash as a sand replacement in flexible pavement construction.

Potential utilization of waste materials for the production of green concrete: A review

Published by

Materials Today: Proceedings

Summary

Reviewed the potential of various waste materials for producing green concrete, promoting sustainable construction.

Investigation on silica fume for its potential utilization with respect to forecasting market size

Published by

Materials Today: Proceedings

Summary

Investigated the potential utilization of silica fume, considering market size forecasts for various applications.

A review on active techniques in microchannel heat sink for miniaturization problem in electronic industry

Published by

Acta Innovaions

Summary

Reviewed active techniques for microchannel heat sinks, addressing miniaturization challenges in the electronics industry.

Suitability of turning and grinding steel chips to synthesize metal matrix composite via powder metallurgy route

Published by

Materials Today: Proceedings

Summary

Evaluated the suitability of using turning and grinding steel chips for synthesizing metal matrix composites via powder metallurgy.

Thermodynamic investigation on solar air heater having roughness as multiple broken arc circular protrusion

Published by

Materials Today: Proceedings

Summary

Conducted a thermodynamic investigation on solar air heaters with rough surfaces featuring broken arc circular protrusions.

Influence of anionic surfactant (SDS) on the structural properties of chromium oxide (Cr2O3) nanoparticles

Published by

Materials Today: Proceedings

Summary

Investigated the influence of anionic surfactant (SDS) on the structural properties of chromium oxide nanoparticles.

Effect of variable blockage height ratio on performance for solar air heater roughened with 45° Z-shaped baffles

Published by

Materials Today: Proceedings

Summary

Examined the effect of variable blockage height ratio on the performance of solar air heaters roughened with 45° Z-shaped baffles.

A Review of Groundwater Status and Problems due to Industrial Pollution: Case Study of Ghaziabad City

Published by

Materials Today: Proceedings

Summary

Reviewed the groundwater status and industrial pollution problems in Ghaziabad City as a case study.

Recent advancements in tailor welded blanks

Published by

Materials Today: Proceedings

Summary

Discussed recent advancements and innovations in tailor welded blanks technology.

A Comprehensive Study Of Deep Brain Stimulation During Last Decade

Published by

Journal of Pharmaceutical Negative Results

Summary

Conducted a comprehensive study on deep brain stimulation over the last decade, analyzing its applications and outcomes.

Significance of Calcium, Sodium and Potassium in Parkinson's State of Basal Ganglia's STN-GPe Model

Published by

13th International Conference on Advances in Computing, Control, and Telecommunication Technologies, ACT 2022

Summary

Investigated the significance of calcium, sodium, and potassium in the STN-GPe model of Parkinson's disease.

Significance of Synaptic Conductance in Parkinson's State of Basal Ganglia's STN-Gpe Model

Published by

13th International Conference on Advances in Computing, Control, and Telecommunication Technologies, ACT 2022

Summary

Analyzed the significance of synaptic conductance in the STN-GPe model of Parkinson's disease.

Effect of Annealing Temperature on Phase Transformation of NiCr2O4 Nanoparticles and Evaluated Its Structural and Magnetic Properties

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Evaluated the effect of annealing temperature on the phase transformation and structural/magnetic properties of NiCr2O4 nanoparticles.

Comparative Study of Concrete Cylinders Confined Using Natural and Artificial Fibre Reinforced Polymers

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Conducted a comparative study on concrete cylinders confined with natural and artificial fiber-reinforced polymers.

Synthesis and Characterization of Highly Transparent and Superhydrophobic Zinc Oxide (ZnO) Film

Published by

Springer (Advances in Functional and Smart Materials)

Summary

Synthesized and characterized highly transparent and superhydrophobic zinc oxide (ZnO) films for various applications.

Application and use of different aluminium alloys with respect to workability, strength, and welding parameter optimization

Published by

Ain Shams Engineering Journal

Summary

Explored the application and optimization of various aluminum alloys concerning workability, strength, and welding parameters.

Comparative study of erosion wear resistance on SS 430 and SS SD 2507

Published by

AIP Conference Proceedings

Summary

Conducted a comparative analysis of erosion wear resistance for SS 430 and SS SD 2507 materials.

Effects of activating flux on aluminum 6061 using TIG welding (GTAW)

Published by

AIP Conference Proceedings

Summary

Investigated the effects of activating flux on aluminum 6061 during Tungsten Inert Gas (TIG) welding processes.

Effect of flow velocity and pressure on carotid artery due to deposition of different shapes of plaque

Published by

IOP Conference Series: Materials Science and Engineering

Summary

Examined the influence of flow velocity and pressure on plaque deposition in carotid arteries, relevant for biomedical engineering.

Dust accumulation and reduction in electrical performance of solar PV panels

Published by

Materials today proceedings

Summary

Investigated the impact of dust accumulation on the electrical performance of solar PV panels and methods for reduction.

Effect of additive on rheology of fine particles slurry suspension

Published by

Materials today proceedings

Summary

Analyzed the effect of additives on the rheological properties of fine particle slurry suspensions.

Replacing E-waste with coarse aggregate in architectural engineering and construction industry

Published by

Materials today proceedings

Summary

Explored the utilization of e-waste as coarse aggregate in the architectural and construction industry for sustainable practices.

Characterization of fly ash for potential utilization in green concrete

Published by

Materials today proceedings

Summary

Characterized fly ash to assess its potential for use in green concrete applications.

Analyze the outcome of waste material as cement replacement agent in basic concrete

Published by

Materials today proceedings

Summary

Analyzed the effectiveness of various waste materials as cement replacement agents in basic concrete formulations.

A study of lean construction and visual management tools through cluster analysis

Published by

Ain Shams Engineering Journal

Summary

Utilized cluster analysis to study the effectiveness of lean construction and visual management tools.

Structured review of papers on the use of different activating flux and welding techniques

Published by

Ain Shams Engineering Journal

Summary

Provided a structured review of research papers on activating flux and welding techniques.

The benefits and advantages of aluminium 6061 over other available grades of aluminium

Published by

Sustainable Energy Systems: Innovative Perspectives, SES-2020

Summary

Presented on the benefits and advantages of Aluminum 6061 compared to other grades of aluminum.

Use of lean construction to deliver projects successfully

Published by

International Scientific Conference: ICMSIT-2020

Summary

Presented research on successfully implementing lean construction principles for project delivery.

The Significant and Use Of Advanced Materials in Different Industries: A Special Case of Aerospace Industry

Published by

ICMSIT-2020 St. Petersburg, Russia

Summary

Discussed the significant use of advanced materials across industries, with a special focus on aerospace.

A Study on Prefabrication Method As A Tool For Waste Minimization: Lean Manufacturing In Construction (2008-18)

Published by

International Scientific Conference: ICMSIT-2020

Summary

Presented a study on prefabrication methods as a tool for waste minimization in lean construction.

Overview of Different Types of Welding Techniques for Alloys

Published by

GLRC 2020, Amity University Noida

Summary

Provided an overview of various welding techniques applicable to different alloys.

Study of Enabling Factors Affecting the Construction Project Delivery

Published by

GLRC 2020, Amity University Noida

Summary

Investigated enabling factors that influence construction project delivery outcomes.

Mechanical And Chemical Properties Of Aluminum 6061-T6

Published by

Amity University Noida

Summary

Presented on the mechanical and chemical properties of Aluminum 6061-T6 alloy.

Rheology of fly and bottom ash slurry at higher concentration

Published by

CHEMBIOEN-2020 NIT Jalandhar

Summary

Investigated the rheological properties of fly and bottom ash slurry at higher concentrations.

Enhancement of Latent Heat Energy Storage System Using Nanomaterials for Different Applications: A Review

Published by

Materials today proceedings

Summary

Reviewed the enhancement of latent heat energy storage systems through the application of nanomaterials across various fields.

Review of literature of lean construction and lean tools using systematic literature review technique (2008–2018)

Published by

Ain Shams Engineering Journal

Summary

Conducted a systematic literature review on lean construction and its tools from 2008 to 2018.

Rheological behavior of fly ash suspension with additive for hydraulic conveyance

Published by

International journal of Applied Mechanics and Engineering

Summary

Studied the rheological characteristics of fly ash suspensions with additives to optimize hydraulic conveyance processes.

Analyzing and modeling of activity patterns of stn-gp network in parkinson's state vs normal state

Published by

PalArch's Journal of Archaeology of Egypt/Egyptology

Summary

Analyzed and modeled activity patterns of the STN-GP network in Parkinson's disease versus normal states.

Advancements in Flexible Pavement Design and Traffic Safety

Published by

Lambert Academic Publishing

Summary

Co-authored a book detailing advancements in flexible pavement design and traffic safety.

An overview of distributed denial of service and internet of things in healthcare devices

Summary

Provided an overview of distributed denial of service (DDoS) attacks and IoT applications in healthcare devices.

Harnessing Waste Ceramics for Sustainable Construction

Published by

Lambert Academic Publishing

Summary

Co-authored a book on utilizing waste ceramics for sustainable construction practices.

Insight to Lean Management for Construction Industry

Published by

Lambert Academic Publishing

Summary

Authored a book providing insights into lean management principles for the construction industry.

Evaluation of RCC Structures with Different Geometry and shapes

Published by

Lambert Academic Publishing

Summary

Co-authored a book evaluating reinforced concrete (RCC) structures with varying geometries and shapes.

Effective Project Control: Strategies for Managing Time and Cost

Published by

Lambert Academic Publishing

Summary

Co-authored a book on effective project control strategies for managing time and cost efficiently.

Analysis of Wheel due to Unevenness of Patching on Flexible Pavement

Published by

Lambert Academic Publishing

Summary

Co-authored a book analyzing the impact of uneven patching on flexible pavements on wheel dynamics.

Optimization of Traffic Signal Timing through MATLAB

Published by

Lambert Academic Publishing

Summary

Co-authored a book on optimizing traffic signal timing using MATLAB simulations.

Beyond Borders: Harnessing Drones for Global Sanitation

Published by

Lambert Academic Publishing

Summary

Co-authored a book exploring the use of drones for global sanitation and waste management.

Design Analysis of School Building: A Novel Approach

Published by

Lambert Academic Publishing

Summary

Co-authored a book presenting a novel approach to the design analysis of school buildings.

Python programming: First step towards automation

Published by

Lambert Academic Publishing

Summary

Co-authored a book introducing Python programming as a foundational step towards automation.

Parametric optimization of slurry erosion behavior of brass

Published by

Materials today proceedings

Summary

Optimized parameters for the slurry erosion behavior of brass, enhancing material durability.

Synthesis and stability of Al2O3/water nanofluids

Published by

Springer (Advances in Materials and Mechanical Engineering)

Summary

Studied the synthesis and stability of Al2O3/water nanofluids for enhanced thermal performance.

Phase image assymetric encryption using Lorenz transform and modified equal modulus decomposition in fractional Fourier domain

Published by

Solid State Technology

Summary

Developed phase image asymmetric encryption using Lorenz transform and modified equal modulus decomposition.

An Introduction To Lean Construction/Visual Management Tool In Construction Projects

Published by

WCTR 2019 IIT Bombay

Summary

Presented an introduction to lean construction and visual management tools in construction projects.

Ionic concentration and action potential differences between a healthy and alzheimer's disease person

Published by

Springer (Communications in Computer and Information Science)

Summary

Investigated ionic concentration and action potential differences in individuals with Alzheimer's disease compared to healthy individuals.

Optimization of Process Parameters for Erosion Wear in Slurry Pipeline

Published by

Springer (Advances in Engineering Design)

Summary

Optimized process parameters to reduce erosion wear in slurry pipelines.

Study and analysis of domestic ash & waste glass powder as partial replacement with cement

Published by

International Journal of Civil Engineering and Technology

Summary

Analyzed the use of domestic ash and waste glass powder as a partial cement replacement in civil engineering applications.

Tribological behaviour of WC-10Co4Cr coated slurry pipe materials

Published by

Industrial Lubrication and Tribology

Summary

Investigated the tribological performance of WC-10Co4Cr coatings on slurry pipe materials, providing insights into wear resistance.

Effect of additives on static settled concentration, pH and viscosity of bottom ash-water suspension

Published by

Journal of Mechanical Engineering - Strojnícky časopis

Summary

Analyzed the impact of additives on the properties of bottom ash-water suspensions, relevant for waste management and industrial applications.

Theoretical investigation of bearing performance by using Non-Newtonian Lubricant

Published by

Imperial journal of Interdisciplinary Research (IJIR)

Summary

Conducted a theoretical investigation into bearing performance using non-Newtonian lubricants.

Effect of hard faced Cr alloy on abrasive wear of low carbon rotavator blades using design of experiments

Published by

Materials today proceedings

Summary

Used design of experiments to assess the effect of hard-faced Cr alloy on the abrasive wear of low carbon rotavator blades.

Characteristics of fly ash in relation of soil amendment

Published by

Materials today proceedings

Summary

Investigated the characteristics of fly ash for its potential use as a soil amendment.

Measurement of flow characteristics for multiparticulate bottom ash-water suspension with additives

Published by

Journal of Residuals science and technology

Summary

Measured flow characteristics of bottom ash-water suspensions with additives, contributing to efficient waste handling.

Comprehensive characterization of grounded bottom ash from Indian thermal power plant

Published by

Journal of Residuals science and technology

Summary

Provided a detailed characterization of grounded bottom ash from Indian thermal power plants for effective utilization.

Erosion wear investigation of HVOF spray WC-10Co4Cr coating on slurry pipeline materials

Published by

Coatings

Summary

Investigated the erosion wear resistance of HVOF-sprayed WC-10Co4Cr coatings on materials used in slurry pipelines.

Data mining and knowledge management

Published by

International journal of engineering research and technology

Summary

Explored concepts of data mining and knowledge management in engineering research.

Characterization of heavy metal trace elements in the fly ash from a thermal power

Published by

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

Summary

Characterized heavy metal trace elements in fly ash from thermal power plants, crucial for environmental management.

Effect of addition of bottom ash on the rheological properties of fly ash slurry at varying temperature

Published by

IOP Conf. Series: Materials Science and Engineering

Summary

Studied the impact of bottom ash addition on the rheological properties of fly ash slurry across different temperatures.

Languages

English
Hindi
Punjabi

Native

Skills

Academic & Leadership

Teaching, Mentoring, Curriculum Development, Academic Administration, Session Chairing, Workshop Facilitation, Technical Writing, Public Speaking, Interpersonal Skills.

Software & Tools

MATLAB, Python, ANSYS, CFD.

Research & Development

Scientific Analysis, Experimental Design, Data Analysis, Research Methodology, Literature Review, Patent Writing, Academic Publishing, Doctoral Supervision.

Mechanical Engineering

Tribology, Materials Science, Nanomaterials, Composite Materials, Fluid Mechanics, Heat Transfer, Thermodynamics, Advanced Manufacturing (TIG welding, HVOF spray, Powder Metallurgy), Solid Mechanics, Finite Element Analysis (FEA), CAD/CAM, Slurry Flow Characteristics, Erosion Wear.

Advanced Technologies

Artificial Intelligence (AI), Machine Learning (ML), Deep Learning, Neural Networks, Computer Simulation, Computational Fluid Dynamics (CFD), Internet of Things (IoT), Signal Processing, Optical Image Processing, Asymmetric Cryptosystems, Intrusion Detection Systems, Explainable AI (XAI).

Sustainable Engineering

Green Concrete, Waste Utilization (Fly Ash, Bottom Ash, E-waste, Plastic Waste), Renewable Energy Systems, Solar Thermal Systems, Eco-Design, Geopolymer Bricks, Environmental Impact Assessment.

Interests

Projects

Organized Conferences/Session Chair/Workshop/Seminar/Training/FDP

Summary

1. Organized one week Skill Development Program (SDP) on Advanced Trends in Mechanical Engineering (ATME- July 2018) organized by K.R. Mangalam University, Gurugram (Haryana), as a co-convener. 2. Organized DAM2IC 2022: International Conference on Design and Applications of Multifunctional Materials, Interfaces, and Composites (DAM2IC 4-7 June 2022) at K.R. Mangalam University, Gurugram (Haryana), as a convener. 3. Organizes GreenAI Nexus 2025: International Conference on AI for Environment, Energy, and Earth Sciences 2025 at Sharad Institute of Technology College of Engineering, Yadrav, Ichalkaranji – Maharashtra, India, as a convener. 4. Attended SERB-Sponsored High-end workshop (KARYASHALA) on Slurry Flow Characteristics and Transportation in Mineral Processing – Principle & Practices [September-25- 30 2022] organized by Department of Mechanical Engineering, National Institute of Technology Jamshedpur. 5. Deliver a lecture on SERB-Sponsored High-end workshop (KARYASHALA) on Slurry Flow Characteristics and Transportation in Mineral Processing – Principle & Practices on September- 30 2022 at National Institute of Technology Jamshedpur. 6. Attended two days’ workshop on SERB sponsored training on characterization of multiparticulate suspension, from 25-26 December 2021 Organized by Department of mechanical Engineering, NIT Jamshedpur, and Jharkhand, India. 7. Attended one week “ICT Tools for Teaching, Learning Process & Institutes” jointly organized by Electronics and ICT Academics held from 13-17 January, 2020 at NIT Jamshedpur, Under the scheme of financial assistance for sitting up of electronics and Academies by ministry of electronics and Information Technology, Government of India. 8. Delivered the expert talk on “Patent writing” in SERB sponsored workshop on research Methodologies from 4 December 2021, under SERB Scientific Social Responsibility Organized by Department of mechanical Engineering, NIT Jamshedpur, Jharkhand, India. 9. Attended SERB sponsored workshop on “Research Methodologies” from 4 December 2021, under SERB Scientific Social Responsibility Organized by Department of mechanical Engineering, NIT Jamshedpur, Jharkhand, India. 10. Attended AICTE Training And Learning (ATAL) Academy Online Elementary FDP on "Novel Materials" from 23/08/2021 to 27/08/2021 at SRM Institute of Management and Technology. 11. Attended five days Faculty Development Program (FDP) on research methodology and latex 31 August -4 September 2021 organized by K.R. Mangalam University, Gurugram (Haryana). 12. Attended one week AICTE Training And Learning (ATAL) Academy Online Elementary FDP on " Manufacturing: Hindsight To Foresight" from (16-20 July 2021) at Birla Institute of Technology and Science, Pilani (BITS Pilani) 13. Attended one week Faculty Development Program (FDP) Artificial Intelligence and Machine Learning-Need of the hour (26-30- July 2021) organized by K.R. Mangalam University, Gurugram (Haryana). 14. Attended one week Faculty Development Program (FDP) Recent Trends in Renewable Energy (02-06 August 2021) organized by K.R. Mangalam University, Gurugram (Haryana). 15. Session chair in Sustainable Energy Systems: Innovative perspectives (SES-2020) Russia-India (October 2020) St. Petersburg, Russia. 16. Attended Short Term Program (STP) on Recent Trends in Energy Conversion Technologies (July 2020) with 25 CPD hours approved by Boards of Engineers Malaysia organized by University Malaysia in collaboration with The Institute of Engineers Malaysia. 17. Attended one week Skill Development Program (SDP) on Advanced Trends in Mechanical Engineering (ATME- July 2018) organized by K.R. Mangalam University, Gurugram (Haryana) 18. Attended technical workshop on Scanning Based Metrological Inspection and Reverse Engineering (April2018) organized by K.R. Mangalam University, Gurugram (Haryana). 19. Attended national seminar on Basics of Rheology and its Applications (May 2017) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana) supported by Haryana State Council for Science and Technology, Department of Science and Technology, Government of Haryana. 20. Attended one week Faculty Development Program (FDP) on Advancements in Mechanical Engineering (Aug-Sep 2016) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana). 21. Attended workshop on Technical Manuscript Preparation with Latex (Dec 2015) organized by Jaypee University of Information Technology, Waknaghat (Himachal Pradesh) 22. Attended short term training program Hands on Training on CFD (Oct-2013) organized by Thapar University, Patiala (Punjab). 23. Attended workshop on Simulation of Engineering Systems (Aug-2013) organized by TEQIP and Thapar University, Patiala (Punjab). 24. Attended short term training program on Basics & Applications of CFD (Aug-2013) organized by Thapar University, Patiala (Punjab). 25. Attended Short Term Training Program (STTP) on Tribology of Bearings for Ultra Precision Machining (Apr 2013) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana).