Lode Daelemans

About

Work

Ghent University

Belgium

Publications

Analysis of fiber-matrix interface debonding under normal loading using in-situ microscopy and cruciform-shaped single glass fiber composite specimens

Published by

Composites Science and Technology

Summary

journal-article

A method to determine local aerodynamic force coefficients from fiber-resolved 3D flow simulations around a staple fiber yarn

Published by

Multibody System Dynamics

Summary

journal-article

The effect of hydrothermal ageing on the interfacial bonding of E-glass fibre/epoxy in quasi-static and fatigue loading

Published by

Composites Part B: Engineering

Summary

journal-article

Development and Validation of an Actuator Line Method for Fuzzy Yarns in High‐Speed Air Flow

Published by

International Journal for Numerical Methods in Engineering

Summary

journal-article

Modeling the Fluid‐Structure Interactions of a Hairy Yarn in Air‐Jet Weaving: A Multiscale Approach

Published by

International Journal for Numerical Methods in Engineering

Summary

journal-article

Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites

Published by

Composites Science and Technology

Summary

journal-article

Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers

Published by

Composites Part B: Engineering

Summary

journal-article

Study of the temperature-humidity equivalence and the time-temperature superposition principle in the finite-strain response of polyamide-6 and short glass fibre-reinforced polyamide-6

Published by

Polymer Testing

Summary

journal-article

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups

Published by

Polymers

Summary

journal-article

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups

Published by

Polymers

Summary

journal-article

Mixed experimental-numerical method for quantitative measurement of mode II fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites

Published by

Polymer Testing

Summary

journal-article

Chemical and structural induced ductile-to-brittle transition in electrospun silica nanofiber membranes

Published by

Ceramics International

Summary

journal-article

Development of a versatile speckle pattern of nano-sized polymer particles for high-resolution SEM-DIC

Published by

Polymer Testing

Summary

journal-article

A novel technique to simulate and characterize yarn mechanical behavior based on a geometrical fiber model extracted from microcomputed tomography imaging

Published by

Textile Research Journal

Summary

journal-article

Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing

Published by

Polymers

Summary

journal-article

Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing

Published by

Polymers

Summary

journal-article

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication

Published by

Polymers

Summary

journal-article

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication

Published by

Polymers

Summary

journal-article

Toughening mechanisms responsible for excellent crack resistance in thermoplastic nanofiber reinforced epoxies through in-situ optical and scanning electron microscopy

Published by

Composites Science and Technology

Summary

journal-article

Long-term stiffness prediction of particle filled polymers by dynamic mechanical analysis: Frequency sweep versus creep method

Published by

Polymer Testing

Summary

journal-article

Computational prediction of the molecular configuration of three-dimensional network polymers

Published by

Nature Materials

Summary

journal-article

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Published by

Composites Science and Technology

Summary

journal-article

Lifting the quality of fused filament fabrication of polylactic acid based composites

Published by

Composites Part B: Engineering

Summary

journal-article

Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin

Published by

IEEE Transactions on Instrumentation and Measurement

Summary

journal-article

The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication

Published by

Polymers

Summary

journal-article

From time dependent incorporation of molecular building blocks to application properties for inorganic and organic three-dimensional network polymers

Summary

other

In-Situ Observations of Microscale Ductility in a Quasi-Brittle Bulk Scale Epoxy

Published by

Polymers

Summary

journal-article

In-Situ Observations of Microscale Ductility in a Quasi-Brittle Bulk Scale Epoxy

Published by

Polymers

Summary

journal-article

The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication

Published by

Polymers

Summary

journal-article

Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance

Published by

Composites Science and Technology

Summary

journal-article

One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications

Published by

Materials & Design

Summary

journal-article

Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate)

Published by

Polymers

Summary

journal-article

Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate)

Published by

Polymers

Summary

journal-article

One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications

Published by

Materials and Design

Summary

journal-article

Excellent Nanofiber Adhesion for Hybrid Polymer Materials with High Toughness Based on Matrix Interdiffusion During Chemical Conversion

Published by

Advanced Functional Materials

Summary

journal-article

Nanostructured Hydrogels by Blend Electrospinning of Polycaprolactone/Gelatin Nanofibers

Published by

Nanomaterials

Summary

journal-article

Experimental and Numerical Analysis of the Tendon Repair Process Using Tubular Braided Fabrics

Published by

Autex Research Journal

Summary

journal-article

Silica Nanofibrous Membranes for the Separation of Heterogeneous Azeotropes

Published by

Advanced Functional Materials

Summary

journal-article

Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres

Published by

Composites Part A: Applied Science and Manufacturing

Summary

journal-article

Nanostructured hydrogels by blend electrospinning of polycaprolactone/gelatin nanofibers

Published by

Nanomaterials

Summary

journal-article

Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres

Published by

Composites Part A: Applied Science and Manufacturing

Summary

journal-article

Nanostructured Hydrogels by Blend Electrospinning of Polycaprolactone/Gelatin Nanofibers

Published by

Nanomaterials

Summary

journal-article

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

Published by

Materials & Design

Summary

journal-article

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

Published by

Materials and Design

Summary

journal-article

Coaxial electrospinning of epoxy and amine monomers in a pullulan shell for self-healing nanovascular systems

Published by

Polymer Testing

Summary

journal-article

Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method

Published by

Composites Part A: Applied Science and Manufacturing

Summary

journal-article

Finite element simulations to evaluate deformation of polyester tubular braided structures

Published by

Textile Research Journal

Summary

journal-article

Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers

Published by

Composite Structures

Summary

journal-article

A hybrid micro-meso-scale unit cell model for homogenization of the nonlinear orthotropic material behavior of coated fabrics used in tensioned membrane structures

Published by

Composite Structures

Summary

journal-article

Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers

Published by

Composite Structures

Summary

journal-article

Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method

Published by

Composites Science and Technology

Summary

journal-article

Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method

Published by

Composites Science and Technology

Summary

journal-article

Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method

Published by

Composites Part A: Applied Science and Manufacturing

Summary

journal-article

Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms

Published by

ACS Appl. Mater. Interfaces

Summary

journal-article

Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms

Published by

ACS Applied Materials and Interfaces

Summary

journal-article

Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates

Published by

Composites Science and Technology

Summary

journal-article

Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates

Published by

Composites Science and Technology

Summary

journal-article

Creation of a nanovascular network by electrospun sacrificial nanofibers for self-healing applications and its effect on the flexural properties of the bulk material

Published by

Polymer Testing

Summary

journal-article

Increasing the damage resistance of composites by interleaving them with electrospun nanofibrous veils

Published by

ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

Summary

conference-paper

Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures: Effect of the interleave morphology

Published by

Composites Science and Technology

Summary

journal-article

Virtual mechanical testing of a complex 3D woven fabric: A unified simulation methodology for deformation mechanics of textile structures during tension, shear and draping

Published by

ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

Summary

conference-paper

Bisphenol A based polyester binder as an effective interlaminar toughener

Published by

Composites Part B: Engineering

Summary

journal-article

Bisphenol A based polyester binder as an effective interlaminar toughener

Published by

Composites Part B: Engineering

Summary

journal-article

Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils

Published by

Composites Science and Technology

Summary

journal-article

Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres

Published by

ICCM International Conferences on Composite Materials

Summary

conference-paper

Using a polyester binder for the interlaminar toughening of glass/epoxy composite laminates

Published by

ICCM International Conferences on Composite Materials

Summary

conference-paper

Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres

Published by

Composites Science and Technology

Summary

journal-article

Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres

Published by

Composites Science and Technology

Summary

journal-article