Guadalupe Alan Castillo Rodriguez

, , ,.

About

Guadalupe Alan Castillo Rodriguez (born December 12, 1965 in Cd. Victoria, Tamaulipas / Mexico) was the Rector of the Polytechnic University of Apodaca in Mexico from 2013 to 2017, and since 1999 he´´ is Professor of Materials with a focus on inorganic, non-metallic materials of the University of Nuevo León (UANL). He studied mechanical engineering and electrical engineering in Mexico from 1984 to 1989 and received his master's degree in mechanical engineering in 1992. He learned the German language in Göttingen and was granted the right to enroll at a German university through the local Goethe-Institut. In 1996, the Technical University of Clausthal awarded him the academic degree of a graduate engineer in materials science (focus on ceramic materials). A year later, as part of the scientific cooperation between UANL and TU Clausthal, he received his doctorate at UANL under the direction of Professor K. J. Leers of the TU Clausthal. Professor Castillo worked as an engineer at Magnelec GmbH (Peñoles Group) from 1992 to 1997, after which he worked as a researcher at the Research and Development Center of the Peñoles Group. After working at the Polytechnic University of García (UPG), in December 2013 he was appointed Rector of the Poliécnica University of Apodaca. From 2002 to 2008, he was also the director of the Graduate Studies Department of Engineering at the University of Nuevo León (UANL) and has designed and coordinated the creation of the Center for Research and Development (CIDET). From 2010 to 2013, he was responsible for the direction of the research there. He was coordinator of the exhibition "Science Tunnel" of the Max Planck Society in Monterrey / Mexico. The successful exhibition attracted over 87,000 visitors in 2013. His scientific publications include more than 40 scientific articles published in journals or conference proceedings. To date, he has worked on more than 25 technical research projects. Dr. Alan Castillo has been a member of the National Research System (SNI) Level I in Mexico since 2000. He has received numerous awards including the "Merit Award" for technological development (TECNOS) in 1994 and 2000 as well as awards from the National Council of Science and Technology (CONACYT) in Mexico and the German Academic Exchange Service (DAAD).

Work

Universidad Autónoma de Nuevo León

Professor

, , Mexico

Jul 1999→ Present

Summary

Universidad Autónoma de Nuevo León

Profesor/Investigador

, , Mexico

Jul 1999→ Present

Summary

Universidad Politécnica de Apodaca

Rector

, , Mexico

Dec 2013→ Dec 2017

Summary

Universidad Politécnica de García

Fundador

, , Mexico

Jun 2013→ Jul 2017

Summary

Servicios Industriales Penoles SAB de CV

Investigador

, , Mexico

Jul 1997→ Jun 1999

Summary

Servicios Industriales Penoles SAB de CV

Ingeniero de Procesos

, , Mexico

Oct 1992→ Jun 1997

Summary

Technische Universität Clausthal

Mieterarbeiter

, , Germany

Oct 1994→ Mar 1996

Summary

Education

Universidad Autónoma de Nuevo León

, , Mexico

Sep 1992→ Jul 1997

Doctor en Ingeniería de Materiales

Universidad Autónoma de Nuevo León

, , Mexico

Aug 1989→ Oct 1992

Maestría en Ciencias de la Ingeniería Mecánica con Especialidad en Materiales

Universidad Autónoma de Nuevo León

, , Mexico

Aug 1984→ Jun 1989

Ingeniero Mecánico Electricista

Publications

Biography Leticia Myriam Torres Guerra

EYA ACADEMY

Jan 2024

journal-article

Carbon nanotubes: properties, synthesis and applications

EYA ACADEMY

Jan 2024

journal-article

Carbon nanotubes: properties, synthesis and applications

Eya Academy

Jan 2024

journal-article

Determination of binding energies in high purity 2H graphite using XPS

EYA ACADEMY

Jan 2024

journal-article

Determination of binding energies in high purity 2H graphite using XPS

Eya Academy

Jan 2024

journal-article

Kinetic analysis of low-temperature MgAl2O4 formation from brucite with α-Al2O3 nanoparticles

EYA ACADEMY

Jan 2024

journal-article

Kinetic analysis of low-temperature MgAl2O4 formation from brucite with α-Al2O3 nanoparticles

Eya Academy

Jan 2024

journal-article

XPS Study on the determination of binding energies in high-purity TiO2 nanoparticles

EYA ACADEMY

Jan 2024

journal-article

XPS Study on the determination of binding energies in high-purity TiO2 nanoparticles

Eya Academy

Jan 2024

journal-article

Desarrollo y aplicación de materiales ingenieriles | Fenómenos de degradación de materiales

Jan 2024

preprint

Biografía Carlos Javier Lizcano Zulaica

EYA ACADEMY

Jan 2023

journal-article

Biografía Guadalupe Evaristo Cedillo Garza

EYA ACADEMY

Jan 2023

journal-article

Estudio de XPS sobre la determinación de la energía de enlace en Ag de alta pureza

EYA ACADEMY

Jan 2023

journal-article

Estudio de XPS sobre la determinación de la energía de enlace en Ag de alta pureza

Eya Academy

Jan 2023

journal-article

Estudio de cristalinidad de películas delgadas de Sulfuro de Antimonio (Sb2S3) mediante baño químico y tratamiento térmico con láser de CO2

EYA ACADEMY

Jan 2023

journal-article

La molécula de dióxido de carbono, ¿responsable o inocente?: reflexiones sobre el papel del CO2 en el calentamiento global

EYA ACADEMY

Jan 2023

journal-article

Tópico de Ciencia La Escalera Alfa: Forjando los Elementos del Universo

EYA ACADEMY

Jan 2023

journal-article

Tópico de Ciencia La Escalera Alfa: Forjando los Elementos del Universo

Eya Academy

Jan 2023

journal-article

Synthesis and Characterization of Bi4Ti3O12 Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Materials

Jan 2023

journal-article

Synthesis and Characterization of Bi₄Ti₃O₁₂ Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Materials

Jan 2023

journal-article

Synthesis and Characterization of Bi₄Ti₃O₁₂ Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Materials

Jan 2023

journal-article

Del Átomo al Universo: descubrimientos y aplicaciones en la Física Nuclear

EYA ACADEMY

Jan 2023

journal-article

Del Átomo al Universo: descubrimientos y aplicaciones en la Física Nuclear

Eya Academy

Jan 2023

journal-article

Influencia de las fases en la energía de Urbach en sistemas Fe2O3-MgO

EYA ACADEMY

Jan 2023

journal-article

Influencia de las fases en la energía de Urbach en sistemas Fe2O3-MgO

Eya Academy

Jan 2023

journal-article

Reducción del Band Gap en el sistema Fe2O3-Mg(OH)2

EYA ACADEMY

Jan 2023

journal-article

Reducción del Band Gap en el sistema Fe2O3-Mg(OH)2

Eya Academy

Jan 2023

journal-article

Relationship between drying rates and mechanical properties in refractory concretes

Ingenierias

Jan 2023

journal-article

Relationship between drying rates and mechanical properties in refractory concretes

Revista Ingenierías

Jan 2023

journal-article

Compuestos base MgO–ZrO2 para producción de silicomanganeso

EYA ACADEMY

Jan 2023

journal-article

Compuestos base MgO–ZrO2 para producción de silicomanganeso

Eya Academy

Jan 2023

journal-article

Desarrollo de un refractario de MgO dopado con η-Al2O3

EYA ACADEMY

Jan 2023

journal-article

Desarrollo de un refractario de MgO dopado con η-Al2O3

Eya Academy

Jan 2023

journal-article

Síntesis de fases desde brucita con adiciones de TiO2

EYA ACADEMY

Jan 2023

journal-article

Síntesis de fases desde brucita con adiciones de TiO2

Eya Academy

Jan 2023

journal-article

Tópico de Ingeniería Energías tradicionales vs. energías alternativas, un futuro más sostenible y limpio

EYA ACADEMY

Jan 2023

journal-article

Tópico de Ingeniería Energías tradicionales vs. energías alternativas, un futuro más sostenible y limpio

Eya Academy

Jan 2023

journal-article

Synthesis and characterization of dense MgO–TiO2 nanocomposites obtained by two novel processing routes

Ceramics International

Jan 2023

journal-article

Synthesis and characterization of dense MgO-TiO2 nanocomposites obtained by two novel processing routes

Ceramics International

Jan 2023

journal-article

Biografía Tushar Kanti Das Roy

Eya Academy

Jan 2023

journal-article

El hierro a través de los tiempos

Eya Academy

Jan 2023

journal-article

Selective laser sintering of alumina-molybdenum nanocomposites

Ceramics International

Jan 2022

journal-article

Selective laser sintering of alumina-molybdenum nanocomposites

Ceramics International

Jan 2022

journal-article

XPS Study on Calcining Mixtures of Brucite with Titania

Materials

Jan 2022

journal-article

XPS Study on Calcining Mixtures of Brucite with Titania

Materials

Jan 2022

journal-article

XPS Study on Calcining Mixtures of Brucite with Titania

Materials

Jan 2022

journal-article

MgO–ZrO₂ Ceramic Composites for Silicomanganese Production

Materials

Jan 2022

journal-article

MgO–ZrO2 Ceramic Composites for Silicomanganese Production

Materials

Jan 2022

journal-article

MgO-ZrO₂ Ceramic Composites for Silicomanganese Production

Materials

Jan 2022

journal-article

XPS Study Calcining Mixtures of Brucite with Titania

Preprints.org

Jan 2022

journal-article

Research and Development of Novel Refractory of MgO Doped with ZrO2 Nanoparticles for Copper Slag Resistance

Materials

Jan 2021

journal-article

Research and Development of Novel Refractory of MgO Doped with ZrO₂ Nanoparticles for Copper Slag Resistance

Materials

Jan 2021

journal-article

Research and development of novel refractory of MgO doped with ZrO₂ nanoparticles for copper slag resistance

Materials

Jan 2021

journal-article

Research and Development of Novel Refractory of MgO Doped with ZrO₂ Nanoparticles for Copper Slag Resistance

Materials

Jan 2021

journal-article

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Materials

Jan 2020

journal-article

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Materials

Jan 2020

journal-article

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al₂O₃ Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Materials

Jan 2020

journal-article

Development of an ultra-low carbon MgO refractory doped with α-Al₂O₃ nanoparticles for the steelmaking industry: A microstructural and thermo-mechanical study

Materials

Jan 2020

journal-article

Development of an Ultra-Low Carbon MgO Refractory Doped with alpha-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Materials

Jan 2020

journal-article

Effects of irradiation energy and nanoparticle concentrations on the structure and morphology of laser sintered magnesia with alumina and iron oxide nanoparticles

Ceramics International

Jan 2020

journal-article

Effects of irradiation energy and nanoparticle concentrations on the structure and morphology of laser sintered magnesia with alumina and iron oxide nanoparticles

Ceramics International

Jan 2020

journal-article

MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

Metals

Jan 2019

journal-article

MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

Metals

Jan 2019

journal-article

MgO Refractory Doped with ZrO₂ Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

Metals

Jan 2019

journal-article

MgO refractory doped with ZrO2 nanoparticles: Influence of cold isostatic and uniaxial pressing and sintering temperature in the physical and chemical properties

Metals

Jan 2019

journal-article

MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

Metals

Jan 2019

journal-article

Copper antimony sulfide nanoparticles by pulsed laser ablation in liquid and their thin film for photovoltaic application

Applied Surface Science

Jan 2019

journal-article

Copper antimony sulfide nanoparticles by pulsed laser ablation in liquid and their thin film for photovoltaic application

Applied Surface Science

Jan 2019

journal-article

Effects of ablation energy and post-irradiation on the structure and properties of titanium dioxide nanomaterials

Applied Surface Science

Jan 2017

journal-article

Effects of ablation energy and post-irradiation on the structure and properties of titanium dioxide nanomaterials

Applied Surface Science

Jan 2017

journal-article

CuSbS2 thin films by rapid thermal processing of Sb2S3-Cu stack layers for photovoltaic application

Solar Energy Materials and Solar Cells

Jan 2017

journal-article

CuSbS₂ thin films by rapid thermal processing of Sb₂S₃-Cu stack layers for photovoltaic application

Solar Energy Materials and Solar Cells

Jan 2017

journal-article

Synthesis and Properties of Platinum Nanoparticles by Pulsed Laser Ablation in Liquid

Journal of Nanomaterials

Jan 2016

journal-article

Synthesis and Properties of Platinum Nanoparticles by Pulsed Laser Ablation in Liquid

Journal of Nanomaterials

Jan 2016

journal-article

CORROSION MECHANISMS IN REFRACTORY CASTABLES BY LIQUID OXIDES

Advances in Molten Slags, Fluxes, and Salts

Jan 2016

journal-article

Laser sintering of magnesia with nanoparticles of iron oxide and aluminum oxide

Applied Surface Science

Jan 2015

journal-article

Structure and morphologies of ZnO nanoparticles synthesized by pulsed laser ablation in liquid: Effects of temperature and energy fluence

Materials Chemistry and Physics

Jan 2015

journal-article

Structure and morphologies of ZnO nanoparticles synthesized by pulsed laser ablation in liquid: Effects of temperature and energy fluence

Materials Chemistry and Physics

Jan 2015

journal-article

Structure and properties of metal, semiconductor and ceramic nanomaterials synthesized by pulsed laser ablation in liquid technique

Laser Ablation: Fundamentals, Methods and Applications

Jan 2015

book

Synthesis and characterization of hercynite nanoparticles by pulsed laser ablation in liquid technique

International Journal of Applied Ceramic Technology

Jan 2015

journal-article

Thin films of copper antimony sulfide: A photovoltaic absorber material

Materials Research Bulletin

Jan 2015

journal-article

Synthesis and Characterization of Hercynite Nanoparticles by Pulsed Laser Ablation in Liquid Technique

International Journal of Applied Ceramic Technology

Jan 2015

journal-article

Synthesis and properties of palladium nanoparticles by pulsed laser ablation in liquid

Applied Surface Science

Jan 2015

journal-article

Thin films of copper antimony sulfide: A photovoltaic absorber material

Materials Research Bulletin

Jan 2015

journal-article

Synthesis and properties of palladium nanoparticles by pulsed laser ablation in liquid

Applied Surface Science

Jan 2015

journal-article

CdS thin films prepared by laser assisted chemical bath deposition

Applied Surface Science

Jan 2015

journal-article

CdS thin films prepared by laser assisted chemical bath deposition

Applied Surface Science

Jan 2015

journal-article

Effect of addition of Al2O3 and Fe2O3 nanoparticles on the microstructural and physico-chemical evolution of dense magnesia composite

Ceramics International

Jan 2015

journal-article

Heat treatments in chemically deposited SnS thin films and their influence in CdS/SnS photovoltaic structuresLE

Journal of Materials Science: Materials in Electronics

Jan 2015

journal-article

Effect of addition of Al2O3 and Fe2O3 nanoparticles on the microstructural and physico-chemical evolution of dense magnesia composite

Ceramics International

Jan 2015

journal-article

Laser sintering of magnesia with nanoparticles of iron oxide and aluminum oxide

Applied Surface Science

Jan 2015

journal-article

DEVELOPMENT OF AN ELECTROFUSED MgO-CaZrO₃ REFRACTORY WITH ADDITION OF HERCYNITE FOR THE CEMENT INDUSTRY

PROCEEDINGS OF THE UNIFIED INTERNATIONAL TECHNICAL CONFERENCE ON REFRACTORIES (UNITECR)

Jan 2014

journal-article

Photovoltaic structures using AgSb(S (x) Se1-x )(2) thin films as absorber

Applied Physics A Solids and Surfaces

Jan 2014

journal-article

Heat treatments in chemically deposited SnS thin films and their influence in CdS/SnS photovoltaic structures

Journal of Materials Science: Materials in Electronics

Jan 2014

journal-article

CuSbS2 thin films by heating Sb2S3/Cu layers for PV applications

Journal of Materials Science: Materials in Electronics

Jan 2014

journal-article

CuSbS2 thin films by heating Sb2S3/Cu layers for PV applications

Journal of Materials Science: Materials in Electronics

Jan 2014

journal-article

MICROSTRUCTURAL AND PHYSICO-CHEMICAL EVOLUTION OF Al2O3 AND Fe2O3 NANOPARTICLES DOPED MAGNESIA (MgO) SINTERED AT 1600 degrees C

PROCEEDINGS OF THE UNIFIED INTERNATIONAL TECHNICAL CONFERENCE ON REFRACTORIES (UNITECR)

Jan 2014

journal-article

Microstructural and physico-chemical evolution of Al2O3 and Fe2O3 nanoparticles doped magnesia (MgO) sintered at 1600 °C

Proceedings of the Unified International Technical Conference on Refractories, UNITECR 2013

Jan 2014

conference-paper

Photovoltaic structures using AgSb(S x Se1-x ) 2 thin films as absorber

Applied Physics A: Materials Science and Processing

Jan 2014

journal-article

AgSb(SxSe1-x)(2) thin films for solar cell applications

Materials Research Bulletin

Jan 2013

journal-article

Failure analysis of Co-Cr hip resurfacing prosthesis during solidification

Case Studies in Engineering Failure Analysis

Jan 2013

journal-article

AgSb(SxSe1-x)2 thin films for solar cell applications

Materials Research Bulletin

Jan 2013

journal-article

Failure analysis of Co–Cr hip resurfacing prosthesis during solidification

Case Studies in Engineering Failure Analysis

Jan 2013

journal-article

Indium selenide thin films by laser irradiation of In/Se layered structure

Surface Review and Letters

Jan 2013

journal-article

INDIUM SELENIDE THIN FILMS BY LASER IRRADIATION OF In/Se LAYERED STRUCTURE

Surface Review and Letters

Jan 2013

journal-article

MgAl2O4 spinel as an effective ceramic bonding in a MgO-CaZrO3 refractory

Journal of the European Ceramic Society

Jan 2013

journal-article

MgAl₂O₄ spinel as an effective ceramic bonding in a MgO-CaZrO₃ refractory

Journal of the European Ceramic Society

Jan 2013

journal-article

AgSb(SxSe1−x)2 thin films for solar cell applications

Materials Research Bulletin

Jan 2013

journal-article

Modification of structure, morphology and physical properties of tin sulfide thin films by pulsed laser irradiation

Applied Physics A: Materials Science and Processing

Jan 2013

journal-article

Modification of structure, morphology and physical properties of tin sulfide thin films by pulsed laser irradiation

Applied Physics A

Jan 2013

journal-article

Nanoparticles of antimony sulfide by pulsed laser ablation in liquid media

Journal of Materials Science

Jan 2013

journal-article

Nanoparticles of antimony sulfide by pulsed laser ablation in liquid media

Journal of Materials Science

Jan 2013

journal-article

Synthesis of silver nanoparticles and antimony oxide nanocrystals by pulsed laser ablation in liquid media

Applied Physics A: Materials Science and Processing

Jan 2013

journal-article

Synthesis of silver nanoparticles and antimony oxide nanocrystals by pulsed laser ablation in liquid media

Applied Physics A

Jan 2013

journal-article

Influence of oxide nanoparticles of Fe, Al and Si on the sintered magnesia for the production of refractory material to be used in secondary ladle metallurgy

Materials Research Society Symposium Proceedings

Jan 2012

conference-paper

Antimony based chalcogenide thin films for photovoltaic applications

Antimony: Characteristics, Compounds and Applications

Jan 2012

book

Copper Indium Diselenide thin films using a hybrid method of chemical bath deposition and thermal evaporation

Materials Research Society Symposium Proceedings

Jan 2012

conference-paper

Hercynite and magnesium aluminate spinels acting as a ceramic bonding in an electrofused MgO-CaZrO 3 refractory brick for the cement industry

Ceramics International

Jan 2012

journal-article

Hercynite and magnesium aluminate spinels acting as a ceramic bonding in an electrofused MgO-CaZrO3 refractory brick for the cement industry

Ceramics International

Jan 2012

journal-article

In 6 Se 7 thin films by heating thermally evaporated indium and chemical bath deposited selenium multilayers

Applied Surface Science

Jan 2012

journal-article

In6Se7 thin films by heating thermally evaporated indium and chemical bath deposited selenium multilayers

Applied Surface Science

Jan 2012

journal-article

Influence of Oxide Nanoparticles of Fe, Al and Si on the Sintered Magnesia for the Production of Refractory Material to Be Used in Secondary Ladle Metallurgy

Materials Research Society Symposium - Proceedings

Jan 2012

journal-article

p-Type CuSbS2 thin films by thermal diffusion of copper into Sb2S3

Solar Energy Materials and Solar Cells

Jan 2011

journal-article

Copper Indium Diselenide thin films using a hybrid method of chemical bath deposition and thermal evaporation

Materials Research Society Symposium - Proceedings

Jan 2011

journal-article

AgSbSe2 and AgSb(S,Se)2 thin films for photovoltaic applications

Applied Surface Science

Jan 2011

journal-article

AgSbSe₂ and AgSb(S,Se)₂ thin films for photovoltaic applications

Applied Surface Science

Jan 2011

journal-article

Effect of spinel "MgAl2O4" on microstructural and mechano-chemical properties evolution in a sintered MgO-CaZrO3 refractory matrix

Industrial Ceramics

Jan 2011

journal-article

Effect of spinel "MgAl2O4" on microstructural and mechano-chemical properties evolution in a sintered MgO-CaZrO3refractory matrix

Industrial Ceramics

Jan 2011

journal-article

Modification of optical and electrical properties of chemical bath deposited CdS using plasma treatments

Thin Solid Films

Jan 2011

journal-article

Modification of optical and electrical properties of chemical bath deposited CdS using plasma treatments

Thin Solid Films

Jan 2011

journal-article

P-Type CuSbS2 thin films by thermal diffusion of copper into Sb2S3

Solar Energy Materials and Solar Cells

Jan 2011

journal-article

Chemically deposited Sb₂S₃ thin films for optical recording

Journal of Physics D: Applied Physics

Jan 2010

journal-article

Coatings made of tungsten carbide and tantalum carbide for machining tools

Vacuum

Jan 2010

journal-article

Coatings made of tungsten carbide and tantalum carbide for machining tools

Vacuum

Jan 2010

journal-article

Boron influence on wear resistance in nickel-based alloys

Wear

Jan 2009

journal-article

Boron influence on wear resistance in nickel-based alloys

Wear

Jan 2009

journal-article

Carbon-doped Sb2S3 thin films: Structural, optical and electrical properties

Solar Energy Materials and Solar Cells

Jan 2009

journal-article

Carbon-doped Sb2S3 thin films: Structural, optical and electrical properties

Solar Energy Materials and Solar Cells

Jan 2009

journal-article

Sb2S3:C/CdS p-n junction by laser irradiation

Thin Solid Films

Jan 2009

journal-article

Sb2S3:C/CdS p-n junction by laser irradiation

Thin Solid Films

Jan 2009

journal-article

Design of blast furnace crucibles by means of the Nodal Wear Model

ISIJ International

Jan 2008

journal-article

Design of blast furnace crucibles by means of the nodal wear model

ISIJ International

Jan 2008

journal-article

On the structure, morphology, and optical properties of chemical bath deposited Sb 2 S 3 thin films

Applied Surface Science

Jan 2008

journal-article

On the structure, morphology, and optical properties of chemical bath deposited Sb2S3 thin films

Applied Surface Science

Jan 2008

journal-article

Microstructure and properties of hercynite-magnesia-calcium zirconate refractory mixtures

Materials Characterization

Jan 2005

journal-article

Microstructure and properties of hercynite-magnesia-calcium zirconate refractory mixtures

Materials Characterization

Jan 2005

journal-article

Thermal modelling of a torpedo-car

Revista de Metalurgia (Madrid)

Jan 2005

journal-article

Thermal modelling of a torpedo-car

Revista de Metalurgia

Jan 2005

journal-article

Model for fusion optimization of refractory grade MgO by electric arc furnace,Modell zur Optimierung des Schmelzprozesses von Magnesia in Lichtbogenoefen

Veitsch-Radex Rundschau

Jan 2000

journal-article

Guadalupe Alan Castillo Rodriguez

About

Work

Universidad Autónoma de Nuevo León

Universidad Autónoma de Nuevo León

Universidad Politécnica de Apodaca

Universidad Politécnica de García

Servicios Industriales Penoles SAB de CV

Servicios Industriales Penoles SAB de CV

Technische Universität Clausthal

Education

Universidad Autónoma de Nuevo León

Universidad Autónoma de Nuevo León

Universidad Autónoma de Nuevo León

Publications

Biography Leticia Myriam Torres Guerra

Carbon nanotubes: properties, synthesis and applications

Carbon nanotubes: properties, synthesis and applications

Determination of binding energies in high purity 2H graphite using XPS

Determination of binding energies in high purity 2H graphite using XPS

Kinetic analysis of low-temperature MgAl2O4 formation from brucite with α-Al2O3 nanoparticles

Kinetic analysis of low-temperature MgAl2O4 formation from brucite with α-Al2O3 nanoparticles

XPS Study on the determination of binding energies in high-purity TiO2 nanoparticles

XPS Study on the determination of binding energies in high-purity TiO2 nanoparticles

Desarrollo y aplicación de materiales ingenieriles | Fenómenos de degradación de materiales

Biografía Carlos Javier Lizcano Zulaica

Biografía Guadalupe Evaristo Cedillo Garza

Estudio de XPS sobre la determinación de la energía de enlace en Ag de alta pureza

Estudio de XPS sobre la determinación de la energía de enlace en Ag de alta pureza

Estudio de cristalinidad de películas delgadas de Sulfuro de Antimonio (Sb2S3) mediante baño químico y tratamiento térmico con láser de CO2

La molécula de dióxido de carbono, ¿responsable o inocente?: reflexiones sobre el papel del CO2 en el calentamiento global

Tópico de Ciencia La Escalera Alfa: Forjando los Elementos del Universo

Tópico de Ciencia La Escalera Alfa: Forjando los Elementos del Universo

Synthesis and Characterization of Bi4Ti3O12 Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Synthesis and Characterization of Bi4Ti3O12 Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Synthesis and Characterization of Bi4Ti3O12 Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Del Átomo al Universo: descubrimientos y aplicaciones en la Física Nuclear

Del Átomo al Universo: descubrimientos y aplicaciones en la Física Nuclear

Influencia de las fases en la energía de Urbach en sistemas Fe2O3-MgO

Influencia de las fases en la energía de Urbach en sistemas Fe2O3-MgO

Reducción del Band Gap en el sistema Fe2O3-Mg(OH)2

Reducción del Band Gap en el sistema Fe2O3-Mg(OH)2

Relationship between drying rates and mechanical properties in refractory concretes

Relationship between drying rates and mechanical properties in refractory concretes

Compuestos base MgO–ZrO2 para producción de silicomanganeso

Compuestos base MgO–ZrO2 para producción de silicomanganeso

Desarrollo de un refractario de MgO dopado con η-Al2O3

Desarrollo de un refractario de MgO dopado con η-Al2O3

Síntesis de fases desde brucita con adiciones de TiO2

Síntesis de fases desde brucita con adiciones de TiO2

Tópico de Ingeniería Energías tradicionales vs. energías alternativas, un futuro más sostenible y limpio

Tópico de Ingeniería Energías tradicionales vs. energías alternativas, un futuro más sostenible y limpio

Synthesis and characterization of dense MgO–TiO2 nanocomposites obtained by two novel processing routes

Synthesis and characterization of dense MgO-TiO2 nanocomposites obtained by two novel processing routes

Biografía Tushar Kanti Das Roy

El hierro a través de los tiempos

Selective laser sintering of alumina-molybdenum nanocomposites

Selective laser sintering of alumina-molybdenum nanocomposites

XPS Study on Calcining Mixtures of Brucite with Titania

XPS Study on Calcining Mixtures of Brucite with Titania

XPS Study on Calcining Mixtures of Brucite with Titania

MgO–ZrO2 Ceramic Composites for Silicomanganese Production

MgO–ZrO2 Ceramic Composites for Silicomanganese Production

MgO-ZrO2 Ceramic Composites for Silicomanganese Production

XPS Study Calcining Mixtures of Brucite with Titania

Research and Development of Novel Refractory of MgO Doped with ZrO2 Nanoparticles for Copper Slag Resistance

Research and Development of Novel Refractory of MgO Doped with ZrO2 Nanoparticles for Copper Slag Resistance

Research and development of novel refractory of MgO doped with ZrO2 nanoparticles for copper slag resistance

Research and Development of Novel Refractory of MgO Doped with ZrO2 Nanoparticles for Copper Slag Resistance

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Development of an ultra-low carbon MgO refractory doped with α-Al2O3 nanoparticles for the steelmaking industry: A microstructural and thermo-mechanical study

Development of an Ultra-Low Carbon MgO Refractory Doped with alpha-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Effects of irradiation energy and nanoparticle concentrations on the structure and morphology of laser sintered magnesia with alumina and iron oxide nanoparticles

Effects of irradiation energy and nanoparticle concentrations on the structure and morphology of laser sintered magnesia with alumina and iron oxide nanoparticles

MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

MgO refractory doped with ZrO2 nanoparticles: Influence of cold isostatic and uniaxial pressing and sintering temperature in the physical and chemical properties

Synthesis and Characterization of Bi₄Ti₃O₁₂ Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

Synthesis and Characterization of Bi₄Ti₃O₁₂ Nanoparticles Obtained via Pulsed Laser Ablation in Liquids

MgO–ZrO₂ Ceramic Composites for Silicomanganese Production

MgO-ZrO₂ Ceramic Composites for Silicomanganese Production

Research and Development of Novel Refractory of MgO Doped with ZrO₂ Nanoparticles for Copper Slag Resistance

Research and development of novel refractory of MgO doped with ZrO₂ nanoparticles for copper slag resistance

Research and Development of Novel Refractory of MgO Doped with ZrO₂ Nanoparticles for Copper Slag Resistance

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al₂O₃ Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

Development of an ultra-low carbon MgO refractory doped with α-Al₂O₃ nanoparticles for the steelmaking industry: A microstructural and thermo-mechanical study

MgO Refractory Doped with ZrO₂ Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

CuSbS₂ thin films by rapid thermal processing of Sb₂S₃-Cu stack layers for photovoltaic application

DEVELOPMENT OF AN ELECTROFUSED MgO-CaZrO₃ REFRACTORY WITH ADDITION OF HERCYNITE FOR THE CEMENT INDUSTRY

MgAl₂O₄ spinel as an effective ceramic bonding in a MgO-CaZrO₃ refractory

AgSbSe₂ and AgSb(S,Se)₂ thin films for photovoltaic applications

Chemically deposited Sb₂S₃ thin films for optical recording