Remigiusz Michalczewski

The Effect of Gear Set Loading on the Form of Damage to Teeth Working Surface

working-paper

Influence of Gear Set Loading on Surface Damage Forms for Gear Teeth with DLC Coating

Coatings

Jan 2025

journal-article

Influence of Gear Set Loading on Surface Damage Forms for Gear Teeth with DLC Coating

Coatings

Jan 2025

journal-article

The Effect of Gear Set Loading on the Form of Damage to Teeth Working Surface

Jan 2025

preprint

Surface Layer Performance of Low-Cost 3D-Printed Sliding Components in Metal-Polymer Friction

Production Engineering Archives

Jan 2024

journal-article

Wear Mechanisms of the Working Surface of Gears after Scuffing Tests

Materials

Jan 2024

journal-article

Wear Mechanisms of the Working Surface of Gears after Scuffing Tests

Materials

Jan 2024

journal-article

Effect of the sintering parameters on the structure and mechanical properties of zirconia-based ceramics

Ceramics International

Jan 2024

journal-article

Surface Fatigue of DLC-Coated Spur Gears

Jan 2024

book-chapter

Abrasive wear, scuffing and rolling contact fatigue of DLC-coated 18CrNiMo7-6 steel lubricated by a pure and contaminated gear oil

Materials

Jan 2021

journal-article

Sliding Wear Performance of AlCrN Coating on TiB₂/Ti Composites at High Temperatures

Materials

Jan 2021

journal-article

Sliding Wear Performance of AlCrN Coating on TiB2/Ti Composites at High Temperatures

Materials

Jan 2021

journal-article

Sliding wear performance of alcrn coating on tib₂ /ti composites at high temperatures

Materials

Jan 2021

journal-article

Adhesion of AlCrN coating deposited on TiB2/Ti composites sintered by SPS dedicated for high temperature tribological applications

Proceedings of the International Conference of DAAAM Baltic "Industrial Engineering"

Jan 2021

conference-paper

The method of tribotesting of PVD coated elements in oscillation motion at high temperature

Proceedings of the International Conference of DAAAM Baltic "Industrial Engineering"

Jan 2021

conference-paper

A comparison of tribological properties of nanolubricants containing carbon nanotori and additional additives

Materials Chemistry and Physics

Jan 2021

journal-article

The wear of PVD coated elements in oscillation motion at high temperature

Proceedings of the Estonian Academy of Sciences

Jan 2021

journal-article

The wear of PVD coated elements in oscillation motion at high temperature,PVD pinnakattega detailide kulumine kõrgel temperatuuril võnkuva liikumise korral

Proceedings of the Estonian Academy of Sciences

Jan 2021

journal-article

A comparison of tribological properties of nanolubricants containing carbon nanotori and additional additives

Materials Chemistry and Physics

Jan 2021

journal-article

Abrasive Wear, Scuffing and Rolling Contact Fatigue of DLC-Coated 18CrNiMo7-6 Steel Lubricated by a Pure and Contaminated Gear Oil

Materials

Jan 2021

journal-article

Abrasive Wear, Scuffing and Rolling Contact Fatigue of DLC-Coated 18CrNiMo7-6 Steel Lubricated by a Pure and Contaminated Gear Oil

Materials

Jan 2021

journal-article

Erosion under turbulent slurry flow: An experimental determination of particle impact angle, impact direction, and distribution thereof by image processing

Wear

Jan 2020

journal-article

Tribological Anti-Wear and Extreme-Pressure Performance of Multifunctional Metal and Nonmetal Doped C-based Nanodots

Lubricants

Jan 2019

journal-article

Tribological synergy between classical ZDDP and innovative MoS2 and MoO3 nanotube additives at elevated temperatures; pp. 178-184

Proceedings of the Estonian Academy of Sciences

Jan 2019

journal-article

Tribological synergy between classical ZDDP and innovative MoS2 and MoO3 nanotube additives at elevated temperatures,Triboloogiline sünergia klassikalise tsink-dialküül-ditiofosfaadi (ZDDP) ja innovatiivsete MoS2 ning MoO3 nanotorulisandite vahel kõrgendatud temperatuuridel

Proceedings of the Estonian Academy of Sciences

Jan 2019

journal-article

Scuffing and rolling contact fatigue resistance of discrete laser spot hardened austempered ductile iron

Wear

Jan 2019

journal-article

Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions

Tribology International

Jan 2019

journal-article

The effect of a gear oil on abrasion, scuffing, and pitting of the DLC-Coated 18CrNiMo7-6 steel

Coatings

Jan 2019

journal-article

Tribological anti-wear and extreme-pressure performance of multifunctional metal and nonmetal doped C-based nanodots

Lubricants

Jan 2019

journal-article

Tribological Anti-Wear and Extreme-Pressure Performance of Multifunctional Metal and Nonmetal Doped C-based Nanodots

Lubricants

Jan 2019

journal-article

The Effect of a Gear Oil on Abrasion, Scuffing, and Pitting of the DLC-Coated 18CrNiMo7-6 Steel

Coatings

Jan 2018

journal-article

The Effect of a Gear Oil on Abrasion, Scuffing, and Pitting of the DLC-Coated 18CrNiMo7-6 Steel

Coatings

Jan 2018

journal-article

Micro-abrasive wear testing of surface engineered surgical grade cocrmo alloy for biotribological applications

Materials Performance and Characterization

Jan 2016

journal-article

The effect of temperature on wear mechanism of the AlCrN coated components

Key Engineering Materials

Jan 2016

book

Tribological behaviour of copper-graphene composite materials

Key Engineering Materials

Jan 2016

book

Effect of CuO and Al2O3 nanoparticle additives on the tribological behavior of fully formulated oils

Wear

Jan 2015

journal-article

The effect of WC/C coating on the wear of bevel gears used in coal mines

Medziagotyra

Jan 2015

journal-article

Tuszyński W., Kalbarczyk M., Michalczewski R., Michalak M., Mydlarz J., Kiser B., Handzlik P.: Metoda i urządzenie do badań wysokoobciążonych węzłów tarcia. Rozdz. 3.2 pracy zbiorowej (red. Adam Mazurkiewicz, Andrzej Majcher): Aparatura badawcza oraz unikatowe urządzenia techniczne dla zaawansowanych technologii zrównoważonego rozwoju. Wyd. ITeE-PIB. Radom 2015, s. 181-204.

Jan 2015

book-chapter

Optimisation of test parameters influencing the dry friction of W-DLC coated elements

5th World Tribology Congress, WTC 2013

Jan 2014

conference-paper

The effect of random surface topography height on fretting in dry gross slip conditions

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Jan 2014

journal-article

The potential of the application of biodegradable and non-toxic base oils for the formulation of gear oils - Model and component scuffing tests

Lubrication Science

Jan 2014

journal-article

The problems of resistance to scuffing of heavily loaded lubricated friction joints with WC/C-coated parts

Industrial Lubrication and Tribology

Jan 2014

journal-article

The scuffing resistance of WC/C coated spiral bevel gears

Key Engineering Materials

Jan 2014

book

Michalczewski R., Kalbarczyk M., Michalak M., Piekoszewski W., Szczerek M., Tuszynski W., Wulczyński J.: New scuffing test methods for the determination of the scuffing resistance of coated gears. Rozdz. 6 pracy zbiorowej (red. Jürgen Gegner): Tri-bology - Fundamentals and Advancements. Wyd. Intech. Chorwacja, 2013. ISBN 978-953-51-1135-1. s. 187-215.

Jan 2013

book-chapter

The effect of PVD coatings on scuffing and pitting resistance of gears

5th World Tribology Congress, WTC 2013

Jan 2013

conference-paper

The rolling contact fatigue of WC/C-coated spur gears

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Jan 2013

journal-article

The influence of oils on the scuffing of concentrated friction joints with low-friction coated elements,Wpływ olejów na zacieranie elementów z powłokami niskotarciowymi skojarzonymi w styku skoncentrowanym

Eksploatacja i Niezawodnosc

Jan 2013

journal-article

A method for the assessment of the rolling contact fatigue of modern engineering materials in lubricated contact

Transactions of Famena

Jan 2012

journal-article

A new scuffing shock test method for the determination of the resistance to scuffing of coated gears

Archives of Civil and Mechanical Engineering

Jan 2012

journal-article

Michalczewski R.: Właściwości tribologiczne smarowanych, wysokoobciążonych ele-mentów maszyn pokrytych cienkimi powłokami niskotarciowymi. Wyd. ITeE-PIB, Radom 2012, ISBN 978-83-77-89-108-7

Jan 2012

book

The rolling contact fatigue of PVD coated spur gears

Key Engineering Materials

Jan 2012

book

Characterization and properties of low-friction, multilayered Cr-doped diamond-like carbon coatings prepared by pulse biased filtered cathodic arc deposition

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Jan 2011

journal-article

Michalczewski R., Piekoszewski W., Szczerek M., Tuszyński W., Wulczyński J.: The New Methods for Scuffing and Pitting Investigation of Coated Materials for Heavy Load-ed, Lubricated Elements. Rozdz. 13 pracy zbiorowej (red. Chang-Hung Kuo): Tribology - Lubricants and Lubrication. Wyd. Intech. 2011. ISBN 978-953-307-371-2. s. 305 320.

Jan 2011

book-chapter

Tribological and corrosion testing of surface engineered surgical grade CoCrMo alloy

Wear

Jan 2011

journal-article

Tuszyński W., Michalczewski R., Piekoszewski W., Szczerek W.: Modern automotive gear oils – classification, characteristics, market analysis, and some aspects of lubrica-tion. Rozdz. 17 pracy zbiorowej (red. Marcello Chiaberge): New trends and developments in automotive industry. Wyd. Intech. 2011. ISBN 978-953-307-999-8. s. 297-322.

Jan 2011

book-chapter

Michalczewski R., Piekoszewski W., Szczerek M., Tuszyński W, Wulczyński J.; Devel-opment of methods and devices for evaluation of low-friction and antiwear PVD/CVD coatings. Praca zbiorowa (red. Adam Mazurkiewicz): „Innovative Technological Solu-tions for Sustainable Development”. ITeE-PIB, Radom, 2010, s. 63÷82, ISBN 978-83-7204-955-1.

Jan 2010

book-chapter

The influence of antiwear additive concentration on the tribological behaviour of a-C:H:W/steel tribosystem

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Jan 2010

journal-article

Comparison of a tribological model and real component test methods for lubricated contacts; pp. 349–358

Estonian Journal of Engineering

Jan 2009

journal-article

Comparison of a tribological model and real component test methods for lubricated contacts,Määrdeaine keskkonnas töötava reaalse detaili triboloogiliste tingimuste reprodutseerimine laboratoorse seadme abil

Estonian Journal of Engineering

Jan 2009

journal-article

Scuffing resistance of DLC-coated gears lubricated with ecological oil; pp. 367–373

Estonian Journal of Engineering

Jan 2009

journal-article

Scuffing resistance of DLC-coated gears lubricated with ecological oil,Teemandilaadse süsinikpindega (DLC) kaetud hammasrataste sööbekulumiskindlus ökoloogilise määrde kasutamisel

Estonian Journal of Engineering

Jan 2009

journal-article

New ecological technology for heavy-loaded machine elements

World Tribology Congress 2009 - Proceedings

Jan 2009

conference-paper

The correlated selection of PVD/CVD coatings and eco-lubricants for heavy-loaded machine components - A new approach

World Tribology Congress 2009 - Proceedings

Jan 2009

conference-paper

The effect of the concentration of AW/EP additives on scuffing resistance of the a-C:H:W/steel tribosystem

World Tribology Congress 2009 - Proceedings

Jan 2009

conference-paper

The lubricant-coating interaction in rolling and sliding contacts

Tribology International

Jan 2009

journal-article

Tribological and nanoscale research on model friction couples intended for hip joint prostheses

Tribology - Materials, Surfaces and Interfaces

Jan 2009

journal-article

Tuszyński W., Szczerek M., Piekoszewski W., Michalczewski R., Wulczyński J.: Tribo-logical devices for friction, wear and lubrication research. Rozdz. I pracy zbiorowej (red. Adam Mazurkiewicz,): Technological innovations for sustainable development. Wyd. ITeE-PIB. Radom 2009.

Jan 2009

book-chapter

An application of PVD/CVD thin hard coatings for heavy-loaded machine components

Society of Tribologists and Lubrication Engineers - 2008 Annual Meeting and Exhibition, Extended Abstracts

Jan 2008

conference-paper

Effect of ageing automotive gear oils on scuffing and pitting

Tribology International

Jan 2008

journal-article

Michalczewski R.: Chemomechanical synergy of PVD/CVD coatings and environmental-ly friendly lubricants in rolling and sliding contacts. s. 191-199. Praca zbiorowa pod redakcją K. Holmberg i in. Triboscience and tribotechnology superior friction and wear control in engines and transmissions. Scientific final report. COST Action 532. Wyd. COST Office Belgia, 2008. ISBN 978-92-898-0040-2.

Jan 2008

book-chapter

The problems of application of PVD/CVD thin hard coatings for heavy-loaded machine components

2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007

Jan 2008

conference-paper

Michalczewski R., Mazurkiewicz A.: Geneza nanonauk i nanotechnologii. Rozdz. I pracy zbiorowej (red. Adam Mazurkiewicz, współpraca Jerzy Dobrodziej, Beata Poteralska): Nanonauki i nanotechnologie. Stan i perspektywy rozwoju. Wyd. ITeE-PIB. Radom 2007, s. 13-32.

ITeE-PIB, Radom

Jan 2007

book-chapter

Wear and friction characteristics of low friction coatings in dry conditions

Tribologia

Jan 2007

journal-article

Effect of wear on EHD film thickness in sliding contacts

TriboTest

Jan 2006

journal-article

The method for assessment of rolling contact fatigue of PVD/CVD coated elements in lubricated contacts

Tribologia

Jan 2006

journal-article

New challenges in application of thin hard coatings on heavy-loaded machine components

Proceedings of the World Tribology Congress III - 2005

Jan 2005

conference-paper

The effect of AW/EP additives on rolling contact fatigue of the coated parts

Proceedings of the World Tribology Congress III - WTC 2005

Jan 2005

conference-paper

The effect of AW/EP additives on rolling contact fatigue of the coated parts

Proceedings of the World Tribology Congress III - 2005

Jan 2005

conference-paper

The resistance to scuffing, seizure and pitting as a result of the chemistry of lubricating oils

Proceedings of the World Tribology Congress III - WTC 2005

Jan 2005

conference-paper

The resistance to scuffing, seizure and pitting as a result of the chemistry of lubricating oils

Proceedings of the World Tribology Congress III - 2005

Jan 2005

conference-paper

The scuffing resistance of the coated tribosystems lubricated with ecological oils

Proceedings of the World Tribology Congress III - WTC 2005

Jan 2005

conference-paper

The scuffing resistance of the coated tribosystems lubricated with ecological oils

Proceedings of the World Tribology Congress III - 2005

Jan 2005

conference-paper

Effect of wear on EHD film thickness in sliding contacts

Technische Akademie Esslingen International Tribology Colloquium Proceedings

Jan 2004

conference-paper

Lubricant effect on rolling contact fatigue of TiN coated parts

Technische Akademie Esslingen International Tribology Colloquium Proceedings

Jan 2004

conference-paper

Michalczewski R., Piekoszewski W., Szczerek M., Tuszyński W., Bujak J.: Solving a tribological problem in the textile industry. Raport VTI: “Current trends in tribology”. Praca zbiorowa pod red. K. Vercammen, K. Van Acker, J. Meneve. VITO. Belgia. s. III.9 – III.12. 2004.

Jan 2004

book

PVD coatings and environmentally friendly lubricants in highly-loaded contacts

Tribologia

Jan 2004

journal-article

Investigation of Antiwear Coatings Deposited by the PVD Process

TriboTest

Jan 2003

journal-article

A method for the tribological testing of thin, hard coatings

TriboTest

Jan 2002

journal-article

Devices for tribotesting of special friction joints,Urza̧dzenia badawcze do testowania specjalnych wȩzlłów tarcia

Prace Naukowe Instytutu Konstrukcji i Eksploatacji Maszyn Politechniki Wroclawskiej/Scientific Papers of the Institute of Machine Design and Operation of the Technical University of Wroclaw

Jan 2002

journal-article

Bator A., Dobrodziej J., Kozioł S., Lech J., Michalczewski R., Piekoszewski W., Szcze-rek M., Tuszyński W., Wiśniewski M., Wojutyński J., Wulczyński J.: Metody i urządze-nia testowe do badania tarcia i zużycia. Rozdział 3 pracy zbiorowej (red. Szczerek M., Wiśniewski M.): Tribologia i Tribotechnika. Wyd. ITeE. Radom 2001, s. 306-332.

Jan 2001

book-chapter

Influence of contact geometry on friction and wear characteristics

TriboTest

Jan 2000

journal-article

Remigiusz Michalczewski

About

Work

Łukasiewicz - Institute for Sustainable Technologies

Education

Radom Technical University

Łodz Technical University

Radom Technical University

Publications

The Effect of Gear Set Loading on the Form of Damage to Teeth Working Surface

Influence of Gear Set Loading on Surface Damage Forms for Gear Teeth with DLC Coating

Influence of Gear Set Loading on Surface Damage Forms for Gear Teeth with DLC Coating

The Effect of Gear Set Loading on the Form of Damage to Teeth Working Surface

Surface Layer Performance of Low-Cost 3D-Printed Sliding Components in Metal-Polymer Friction

Wear Mechanisms of the Working Surface of Gears after Scuffing Tests

Wear Mechanisms of the Working Surface of Gears after Scuffing Tests

Effect of the sintering parameters on the structure and mechanical properties of zirconia-based ceramics

Surface Fatigue of DLC-Coated Spur Gears

Abrasive wear, scuffing and rolling contact fatigue of DLC-coated 18CrNiMo7-6 steel lubricated by a pure and contaminated gear oil

Sliding Wear Performance of AlCrN Coating on TiB2/Ti Composites at High Temperatures

Sliding Wear Performance of AlCrN Coating on TiB2/Ti Composites at High Temperatures

Sliding wear performance of alcrn coating on tib2 /ti composites at high temperatures

Adhesion of AlCrN coating deposited on TiB2/Ti composites sintered by SPS dedicated for high temperature tribological applications

The method of tribotesting of PVD coated elements in oscillation motion at high temperature

A comparison of tribological properties of nanolubricants containing carbon nanotori and additional additives

The wear of PVD coated elements in oscillation motion at high temperature

The wear of PVD coated elements in oscillation motion at high temperature,PVD pinnakattega detailide kulumine kõrgel temperatuuril võnkuva liikumise korral

A comparison of tribological properties of nanolubricants containing carbon nanotori and additional additives

Abrasive Wear, Scuffing and Rolling Contact Fatigue of DLC-Coated 18CrNiMo7-6 Steel Lubricated by a Pure and Contaminated Gear Oil

Abrasive Wear, Scuffing and Rolling Contact Fatigue of DLC-Coated 18CrNiMo7-6 Steel Lubricated by a Pure and Contaminated Gear Oil

Erosion under turbulent slurry flow: An experimental determination of particle impact angle, impact direction, and distribution thereof by image processing

Tribological Anti-Wear and Extreme-Pressure Performance of Multifunctional Metal and Nonmetal Doped C-based Nanodots

Tribological synergy between classical ZDDP and innovative MoS2 and MoO3 nanotube additives at elevated temperatures; pp. 178-184

Tribological synergy between classical ZDDP and innovative MoS2 and MoO3 nanotube additives at elevated temperatures,Triboloogiline sünergia klassikalise tsink-dialküül-ditiofosfaadi (ZDDP) ja innovatiivsete MoS2 ning MoO3 nanotorulisandite vahel kõrgendatud temperatuuridel

Scuffing and rolling contact fatigue resistance of discrete laser spot hardened austempered ductile iron

Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions

The effect of a gear oil on abrasion, scuffing, and pitting of the DLC-Coated 18CrNiMo7-6 steel

Tribological anti-wear and extreme-pressure performance of multifunctional metal and nonmetal doped C-based nanodots

Tribological Anti-Wear and Extreme-Pressure Performance of Multifunctional Metal and Nonmetal Doped C-based Nanodots

The Effect of a Gear Oil on Abrasion, Scuffing, and Pitting of the DLC-Coated 18CrNiMo7-6 Steel

The Effect of a Gear Oil on Abrasion, Scuffing, and Pitting of the DLC-Coated 18CrNiMo7-6 Steel

Micro-abrasive wear testing of surface engineered surgical grade cocrmo alloy for biotribological applications

The effect of temperature on wear mechanism of the AlCrN coated components

Tribological behaviour of copper-graphene composite materials

Effect of CuO and Al2O3 nanoparticle additives on the tribological behavior of fully formulated oils

The effect of WC/C coating on the wear of bevel gears used in coal mines

Optimisation of test parameters influencing the dry friction of W-DLC coated elements

The effect of random surface topography height on fretting in dry gross slip conditions

The potential of the application of biodegradable and non-toxic base oils for the formulation of gear oils - Model and component scuffing tests

The problems of resistance to scuffing of heavily loaded lubricated friction joints with WC/C-coated parts

The scuffing resistance of WC/C coated spiral bevel gears

The effect of PVD coatings on scuffing and pitting resistance of gears

The rolling contact fatigue of WC/C-coated spur gears

The influence of oils on the scuffing of concentrated friction joints with low-friction coated elements,Wpływ olejów na zacieranie elementów z powłokami niskotarciowymi skojarzonymi w styku skoncentrowanym

A method for the assessment of the rolling contact fatigue of modern engineering materials in lubricated contact

A new scuffing shock test method for the determination of the resistance to scuffing of coated gears

Michalczewski R.: Właściwości tribologiczne smarowanych, wysokoobciążonych ele-mentów maszyn pokrytych cienkimi powłokami niskotarciowymi. Wyd. ITeE-PIB, Radom 2012, ISBN 978-83-77-89-108-7

The rolling contact fatigue of PVD coated spur gears

Characterization and properties of low-friction, multilayered Cr-doped diamond-like carbon coatings prepared by pulse biased filtered cathodic arc deposition

Tribological and corrosion testing of surface engineered surgical grade CoCrMo alloy

The influence of antiwear additive concentration on the tribological behaviour of a-C:H:W/steel tribosystem

Comparison of a tribological model and real component test methods for lubricated contacts; pp. 349–358

Comparison of a tribological model and real component test methods for lubricated contacts,Määrdeaine keskkonnas töötava reaalse detaili triboloogiliste tingimuste reprodutseerimine laboratoorse seadme abil

Scuffing resistance of DLC-coated gears lubricated with ecological oil; pp. 367–373

Scuffing resistance of DLC-coated gears lubricated with ecological oil,Teemandilaadse süsinikpindega (DLC) kaetud hammasrataste sööbekulumiskindlus ökoloogilise määrde kasutamisel

New ecological technology for heavy-loaded machine elements

The correlated selection of PVD/CVD coatings and eco-lubricants for heavy-loaded machine components - A new approach

The effect of the concentration of AW/EP additives on scuffing resistance of the a-C:H:W/steel tribosystem

The lubricant-coating interaction in rolling and sliding contacts

Tribological and nanoscale research on model friction couples intended for hip joint prostheses

Tuszyński W., Szczerek M., Piekoszewski W., Michalczewski R., Wulczyński J.: Tribo-logical devices for friction, wear and lubrication research. Rozdz. I pracy zbiorowej (red. Adam Mazurkiewicz,): Technological innovations for sustainable development. Wyd. ITeE-PIB. Radom 2009.

An application of PVD/CVD thin hard coatings for heavy-loaded machine components

Effect of ageing automotive gear oils on scuffing and pitting

The problems of application of PVD/CVD thin hard coatings for heavy-loaded machine components

Michalczewski R., Mazurkiewicz A.: Geneza nanonauk i nanotechnologii. Rozdz. I pracy zbiorowej (red. Adam Mazurkiewicz, współpraca Jerzy Dobrodziej, Beata Poteralska): Nanonauki i nanotechnologie. Stan i perspektywy rozwoju. Wyd. ITeE-PIB. Radom 2007, s. 13-32.

Wear and friction characteristics of low friction coatings in dry conditions

Effect of wear on EHD film thickness in sliding contacts

The method for assessment of rolling contact fatigue of PVD/CVD coated elements in lubricated contacts

New challenges in application of thin hard coatings on heavy-loaded machine components

The effect of AW/EP additives on rolling contact fatigue of the coated parts

Sliding Wear Performance of AlCrN Coating on TiB₂/Ti Composites at High Temperatures

Sliding wear performance of alcrn coating on tib₂ /ti composites at high temperatures